CIMTECH® 50-F321
CIMTECH® 50-F321 with InSol™ Technology metalworking fluid is a unique, low pH synthetic fluid designed for the aerospace industry and is recommended for heavy to severe duty machining and grinding operations, including creep feed grinding, on non-ferrous or ferrous metals. Suitable for use where extreme lubricity is required, such as deep hole drilling and roll form tapping.
Properties
- Physical Form
- Liquid
Product families
Applications
- Equipment & Parts
- Aerospace Fluids & Lubricants
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- CIMTECH
- Features
- Excellent Lubricity, Good Surface Finish
- Application Area
- Machining Operations
- Metalworking Fluid Type
- Synthetic
- Compatible Substrates & Surfaces
- Carbon Steel, Metal, Steel
- Odor
- Chemical
- Color
- Transparent
- Markets
- Automotive & Transportation
- Industrial
- Appearance
- Clear
- Product Type
- Metalworking Fluids
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Concentration
BCG Titration, Total Alkalinity, CIMCHEK™ Test Strip or Refractometer can be used. The Refractometer Factor is 1.6 Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing. A refractometer is only recommended for use in checking the concentration on a fresh charge.
- Water Solubility
- 100% Miscible
- Handling
If frozen, product separates. Thaw completely at room temperature and stir thoroughly before use. Inside storage is recommended.
- Benefits and Features
Excellent lubricity, tool life and surface finish; Unlike most synthetics, this fluid can be used to roll/form tap Aluminum and some Steels; Up to 20% productivity gains over competitors; Excellent rancidity control; Rejects tramp oil which extends sump life; Minimal need for additives; Provides excellent part visibility; Low misting; Mild to skin; Very low foaming even when used with de-ionized water
- Ready to Use Product Features
- Excellent Lubricity
- Good Surface Finish
- Recommended Starting Dilutions
CIMTECH® 50 — F321 with InSol™ Technology is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55°F (13°C). Add no other materials to the concentrate or mix unless approved by your CIMCOOL® Territory Manager. Grinding 5% - 10% (1:20 to 1:10) Machining 5%-10% (1:20 to 1:10)
- Compatible Substrates and Surfaces
- Carbon Steel
- Metal
- Steel
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (SUS, 100°F, 38°C) | 110.0 | — |
| pH Concentrate | 8.2 | — |
| Total Chlorine | 0.0 | ppm |
| Silicones | None | — |
| Weight (60°F, 15.6 °C) | 9.0 | Ib/gal |
| Chloride | max. 900 | ppm |
| pH Mix 5% (Typical Operating) | 7.5 | — |
| Total Sulfur | 0.0 | wt% |
