CIMTECH® 46C
CIMTECH® 46C synthetic metalworking fluid was developed specifically for carbide grinding applications. It is also recommended for moderate duty ferrous metal machining and grinding operations.
Properties
- Physical Form
- Liquid
Product families
Applications
- Equipment & Parts
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- CIMTECH
- Features
- Corrosion Resistant, Defoaming
- Application Area
- Machining Operations
- Metalworking Fluid Type
- Synthetic
- Compatible Substrates & Surfaces
- Carbide, Iron, Metal
- Odor
- Chemical
- Color
- Transparent
- Markets
- Industrial
- Appearance
- Clear
- Product Type
- Metalworking Fluids
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Concentration
BCG Titration, Total Alkalinity or Refractometer can be used. The Refractometer Factor is 1.9. Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing. A refractometer is only recommended for use in checking the concentration on a fresh charge.
- Labeling Claims
- Silicone-free
- Water Solubility
- 100% Miscible
- Handling
If frozen, product separates. Thaw completely at room temperature and stir thoroughly before use. Inside storage is recommended.
- Benefits and Features
Superior Cobalt Corrosion Inhibition: CIMTECH 46C is designed to maintain low levels of dissolved cobalt in the mix. Excellent Rancidity Control: Excellent fluid life, minimizing the need for additives. Excellent Foam Control: CIMTECH 46C has good foam control. Corrosion Protection: Outstanding rust protection for the work-piece and machine tool.
- Ready to Use Product Features
- Corrosion Resistant
- Defoaming
- Recommended Starting Dilutions
CIMTECH 46C is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55°F (13°C). Add no other materials to the concentrate or mix unless approved by your CIMCOOL® Territory Manager. Grinding 5% - 10% (1:20 to 1:10) Machining 5% - 10% (1:20 to 1:10)
- Compatible Substrates and Surfaces
- Carbide
- Iron
- Metal
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (SUS, 100°F, 38°C) | 40.0 | — |
| pH Concentrate | 10.3 | — |
| Total Chlorine | 0.0/0.1 | wt% |
| Silicones | None | — |
| Weight (60°F, 15.6 °C) | 9.0 | Ib/gal |
| pH Mix 5% (Typical Operating) | 9.1 | — |
| Chloride | 0.1 | wt% |
| Total Sulfur | 0.0 | wt% |
