CIMSTAR® 50 588CU-2
CIMSTAR® 50 588CU-2 is a metalworking fluid that is semi-synthetic.
Properties
- Physical Form
- Liquid
Product families
Applications
- Equipment & Parts
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- CIMSTAR
- Features
Corrosion Resistant, Excellent Lubricity, Microbe Resistant
- Metalworking Fluid Type
- Semi-Synthetic
- Compatible Substrates & Surfaces
- Aluminum, Copper, Iron, Metal, Steel
- Odor
- Chemical
- Color
- Transparent
- Markets
- Industrial
- Appearance
- Clear
- Product Type
- Metalworking Fluids
- Technology
- Ready-to-Use Products
- Base Oil
- Semi-Synthetic
- Concentration
Non-solvent Titration, Total Alkalinity, CIMCHEK™ Test Strip or Refractometer can be used. The Refractometer Factor is 1.1 Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing. A refractometer is only recommended for use in checking the concentration of a fresh charge.
- Water Solubility
- 100% Miscible
- Handling
If frozen, product separates. Thaw completely at room temperature and stir thoroughly before use. Inside storage is recommended.
- Benefits and Features
Corrosion Protection: Extremely Effective Corrosion Inhibitor Package Which Prevent Stain On Most Copper Alloys And Aluminum Alloys. Also Contains Rust Inhibitors Which Prevents In-process Rust On Machines And Parts. Versatile: Designed To Provide Good Lubrication In A Variety Of Operations On A Variety Of Materials. Easy To Maintain And Control. Waste Treatable Using Standard Fluid Treatment Procedures And Systems. Microbialcontrol: Provides Effective Protection Against Bacteria And Mold If Product Concentration Is Properly Maintained. Provides Long Life And Minimizes The Use Of Additives. Foam Control: Designed To Be Low Foaming In Soft And Hard Water.
- Ready to Use Product Features
- Corrosion Resistant
- Excellent Lubricity
- Microbe Resistant
- Recommended Starting Dilutions
CX 50-588CU-2 is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55F (13 C). Add no other materials to the concentrate or mix unless approved by your CIMCOOL® District Manager. Grinding 5% - 10% (1:20 to 1:10) Machining 5% - 10% (1:20 to 1:10)
- Compatible Substrates and Surfaces
- Aluminum
- Copper
- Iron
- Metal
- Steel
Technical data
Table 1 of 1
2 rows| Characteristic | Value |
|---|---|
| pH Mix 5% (Typical Operating) | 8.4 |
| Density (60°F, 15.6 °C) | 0.96 |
