CIMSTAR® 70-HFP
CIMSTAR® 70-HFP is a chlorine-free semi-synthetic metalworking fluid of the latest generation.
Properties
- Physical Form
- Liquid
Product families
Applications
- Equipment & Parts
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- CIMSTAR
- Features
Corrosion Resistant, Extreme Pressure Performance, Low Foaming
- Application Area
Boring Applications, Drilling Applications, Milling Operations, Reaming, Tapping Operations, Turning Operations; Boring Applications; Drilling Applications; Milling Operations; Reaming; Tapping Operations; Turning Operations
- Metalworking Fluid Type
- Semi-Synthetic
- Compatible Substrates & Surfaces
- Aluminum, Metal, Steel
- Odor
- Chemical
- Markets
- Industrial
- Appearance
- Hazy
- Product Type
- Metalworking Fluids
- Technology
- Ready-to-Use Products
- Base Oil
- Semi-Synthetic
- Concentration
Non-solvent Titration, Total Alkalinity or Refractometer can be used. The Refractometer Factor is 1.4. A refractometer is only recommended for use in checking the concentration of a fresh charge. Multiply the scale reading obtained on your CIMCOOL® Refractometer by this factor to obtain the mix concentration in percent. Calibrate the refractometer so that it reads 0.0 with water before testing the sample mix. Remove gross contaminants from the sample mixes before testing.
- Water Solubility
- 100% Miscible
- Handling
If frozen thaw completely at room temperature before use. Inside storage is recommended.
- Benefits and Features
Cleanliness: Cimstar 70-hfp Has Unique Residue Characteristics, Keeping Machine Tools Extremely Clean. The Detergency Of The Product Keeps Chips From Building Up On The Machine Tool. Foam Control: Cimstar 70-hfp Exhibits Adequate Foam Control In High Pressure Applications. Corrosion Control: The Product Also Has Excellent Corrosion Control For Steel, Cast Iron And Most Aluminum Alloys.
- Ready to Use Product Features
- Corrosion Resistant
- Extreme Pressure Performance
- Low Foaming
- Recommended Starting Dilutions
CIMSTAR 70-HFP is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55F. Add no other materials to the concentrate or mix unless approved by your CIMCOOL® District Manager. Grinding 5% - 10% (1:20 to 1:10) Machining 5% - 10% (1:20 to 1:10)
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Steel
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (SUS, 100°F) | 270.0 | — |
| pH Concentrate | 9.4 | — |
| Total Chlorine | 0.0 | ppm |
| Silicones | Yes | — |
| Weight (60°F, 15.6 °C) | 8.4 | Ib/gal |
| Chloride | max. 50 | ppm |
| pH Mix 5% (Typical Operating) | 9.0 | — |
| Total Sulfur | 0.2 | wt% |
