To catalogue
Duralar® WearGuard
Duralar® WearGuard has a metal component that provides toughness, the diamond component provides exceptional wear resistance, and the combination delivers extraordinary overall performance. These Duralar coatings can be significantly thicker than conventional coatings, and they contain molecular diamond structures within the matrix to create an exceptionally durable material for numerous applications.
Product families
Applications
Paints & Coatings — Specialty Coatings
- Other Specialty Coatings
Product Families
Ready-to-Use Products — Paints & Coatings
- Protective Coatings
Other characteristics
- Brand
- Duralar
- Features
Durable, Excellent Coating Performance, Excellent Toughness, Wear Resistant
- Product Type
- Coating
- Application Area
- Bearings
- Compatible Substrates & Surfaces
- Aluminum, Metal, Nickel, Steel
- Markets
- Paints & Coatings
- Technology
- Ready-to-Use Products
- Applicable Substrates
- Carbon Steel
- Stainless Steel
- Aluminum
- Inconel
- Ti Alloys
- Ni/Ni Alloys
- SiC
- Ready to Use Product Features
- Durable
- Excellent Coating Performance
- Excellent Toughness
- Wear Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Nickel
- Steel
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit |
|---|---|---|
| Thickness | 1.0 - 6.0 | µm |
| Hardness (Adjustable to Application) | 15 - 20 | GPa |
| Hardness (Stainless 304, Typical) | max. 1 | GPa |
| Hardness (Stainless 17 - 4, Typical) | max. 5 | GPa |
| Hardness (Inconel 718, Typical) | max. 3 | GPa |
| Hardness (Chrome on Steel,Typical) | 3×10⁻⁴ | GPa |
| Wear Rate (Typical, Dry) | 1×10⁻⁷ | mm³/nm |
| Wear Rate (Stainless 304) | 1×10⁻³ | mm³/nm |
| Wear Rate (Stainless 17 - 4) | 4×10⁻³ | mm³/nm |
| Wear Rate (Inconel 718) | 6×10⁻⁴ | mm³/nm |
| Wear Rate (Chrome on Steel) | 3×10⁻⁴ | mm³/nm |
| Coefficient of Friction (Dry) | max. 0.1 | — |
