To catalogue
Duralar® Sliding Wear Control
Duralar® Sliding Wear Control coatings are specifically designed for use in applications that are subject to adhesive wear from the sliding motion of parts such as in reciprocating pistons and pumps. Many of these applications are found in oil and gas, automotive, and other heavy industries.
Product families
Applications
Automotive & Transportation — Automotive
- Other Automotive Applications
Industrial — Oil, Gas & Mining
- Midstream
- Other Oil Gas & Mining Applications
Product Families
Ready-to-Use Products — Paints & Coatings
- Protective Coatings
Other characteristics
- Brand
- Duralar
- Features
- Wear Resistant
- Product Type
- Coating
- Application Area
- Reciprocating Piston Pump
- Compatible Substrates & Surfaces
- Aluminum, Metal, Nickel, Steel
- Markets
- Automotive & Transportation
- Industrial
- Technology
- Ready-to-Use Products
- Applicable Substrates
- Carbon Steel
- Stainless Steel
- Aluminum
- Inconel
- Ti Alloys
- Ni/Ni Alloys
- SiC
- Applications
- Wet, dry, oil, drilling mud
- Ready to Use Product Features
- Wear Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Nickel
- Steel
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit |
|---|---|---|
| Thickness | 1.0 - 6.0 | µm |
| Hardness (Adjustable to Application) | 12.0 | GPa |
| Hardness (Stainless 304, Typical) | max. 1 | GPa |
| Hardness (Stainless 17 - 4, Typical) | max. 5 | GPa |
| Hardness (Inconel 718, Typical) | max. 3 | GPa |
| Hardness (Chrome on Steel,Typical) | max. 10 | GPa |
| Wear Rate (Typical, Dry) | 5×10⁻⁷ | mm³/nm |
| Wear Rate (Stainless 304) | 1×10⁻³ | mm³/nm |
| Wear Rate (Stainless 17 - 4) | 4×10⁻³ | mm³/nm |
| Wear Rate (Inconel 718) | 6×10⁻⁴ | mm³/nm |
| Wear Rate (Chrome on Steel) | 3×10⁻⁴ | mm³/nm |
| Coefficient of Friction (Dry) | max. 0.1 | — |
