To catalogue
Duralar® Abrasive Wear Control
Duralar® Abrasive Wear Control coatings provide additional thickness for applications requiring maximum abrasion resistance, including protection against wear from particles in slurry flow.
Product families
Ready-to-Use Products — Paints & Coatings
- Protective Coatings
Other characteristics
- Brand
- Duralar
- Features
- Abrasion Resistant, Wear Resistant
- Product Type
- Coating
- Compatible Substrates & Surfaces
- Aluminum, Metal, Nickel, Steel
- Technology
- Ready-to-Use Products
- Applicable Substrates
- Carbon Steel
- Stainless Steel
- Aluminum
- Inconel
- Ti Alloys
- Ni/Ni Alloys
- SiC
- Applications
- As per ASTM G65
- Ready to Use Product Features
- Abrasion Resistant
- Wear Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Nickel
- Steel
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit |
|---|---|---|
| Thickness | 30.0 - 80.0 | µm |
| Hardness (Adjustable to Application) | 20.0 | GPa |
| Hardness (Stainless 304, Typical) | max. 1 | GPa |
| Hardness (Stainless 17 - 4, Typical) | max. 5 | GPa |
| Hardness (Inconel 718, Typical) | max. 3 | GPa |
| Hardness (Chrome on Steel,Typical) | max. 10 | GPa |
| Wear Rate (Typical, Dry) | 5×10⁻⁷ | mm³/nm |
| Wear Rate (Stainless 304) | 1×10⁻³ | mm³/nm |
| Wear Rate (Stainless 17 - 4) | 4×10⁻³ | mm³/nm |
| Wear Rate (Inconel 718) | 6×10⁻⁴ | mm³/nm |
| Wear Rate (Chrome on Steel) | 3×10⁻⁴ | mm³/nm |
| Coefficient of Friction (Dry) | max. 0.1 | — |
