To catalogue
Duralar® ArmorLube™
Duralar® ArmorLube™ coating provides a unique combination of dry lubrication and exceptional hardness. Its carbon content provides a natural graphitic lubricity and an extremely low coefficient of friction. ArmorLube coating is well suited for applications that require a clean, dry, permanent lubrication without oils or greases, which can accumulate dirt and cause fouling.
Product families
Applications
Automotive & Transportation — Automotive
- Other Automotive Applications
Automotive & Transportation — Coatings & Finishes
- Aerospace Coatings
Industrial — Oil, Gas & Mining
- Other Oil Gas & Mining Applications
Automotive & Transportation — Transportation
- Aerospace & Aviation
Product Families
Ready-to-Use Products — Paints & Coatings
- Other Paints & Coatings
Other characteristics
- Brand
- Duralar
- Features
- High Hardness, Low Friction, Lubricated
- Product Type
- Coating
- Markets
- Automotive & Transportation
- Industrial
- Technology
- Ready-to-Use Products
- Applicable Substrates
- Carbon Steel
- Stainless Steel
- Aluminim
- Inconel
- Ti Alloys
- Ni/Ni Alloys
- SiC
- Ready to Use Product Features
- High Hardness
- Low Friction
- Lubricated
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit |
|---|---|---|
| Thickness | 6.0 - 10.0 | µm |
| Hardness (Adjustable to Application) | 10.0 - 15.0 | GPa |
| Hardness (Stainless 304, Typical) | max. 1 | GPa |
| Hardness (Stainless 17 - 4, Typical) | max. 5 | GPa |
| Hardness (Inconel 718, Typical) | max. 3 | GPa |
| Hardness (Chrome on Steel,Typical) | 3×10⁻⁴ | GPa |
| Wear Rate (Typical, Dry) | 5×10⁻⁷ | mm³/nm |
| Wear Rate (Stainless 304) | 1×10⁻³ | mm³/nm |
| Wear Rate (Stainless 17 - 4) | 4×10⁻³ | mm³/nm |
| Wear Rate (Inconel 718) | 6×10⁻⁴ | mm³/nm |
| Wear Rate (Chrome on Steel) | 3×10⁻⁴ | mm³/nm |
| Coefficient of Friction (Dry) | max. 0.1 | — |
