ALFATER® XL A40I 4GP0000
MOCOM Compounds ALFATER® XL A40I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding. It has a melt temperature of 190-220°C and a mold temperature of 10-60°C with injection speed in the middle to high range, back pressure (hydraulic) greater than 3 bar and a holding pressure of 50-70% of injection pressure. It has a natural color with bright inherent color and is low emission, with good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets, and can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and two-component components.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Furniture
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Consumer Electronics
- Sensors & Actuators
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 930.0 - 930.0 kg/m³
- End Uses
Automotive Applications, Cable Ducts, Construction Applications, Electrical/Electronic Applications, Furniture, Handles, Profiles, Protective Caps, Racks, Sealing Lip, Seals, Shelves, Shock Absorbers, Soft Touch Applications, Sporting Goods, Thin-walled Parts
- Features
Chemical Resistant, Excellent Hydrolysis Resistance, Flexible, Good Colorability, Good Flow, Good Weather Stability, Hot Air Resistant, Low Emissions, Ozone Resistant, Soft, Soft Touch
- Polymer Name
- PP/EPDM
- Tear Strength
- 16.0 - 16.0 kN/m
- Processing Methods
- Injection Molding
- Color
- Natural
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Excellent Hydrolysis Resistance
- Flexible
- Good Colorability
- Good Flow
- Good Weather Stability
- Hot Air Resistant
- Low Emissions
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylene Copolymer
- Polypropylenes (PP)
- Thermoplastic Elastomers (TPE)
- Thermoplastic Polyolefins (TPO)
- Thermoplastic Vulcanizates (TPV)
- Plastics and Elastomers End Uses
- Automotive Applications
- Cable Ducts
- Construction Applications
- Electrical/Electronic Applications
- Furniture
- Handles
- Profiles
- Protective Caps
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 4.0 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 16.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 400.0 | % | ISO 37 |
| Shore Hardness A (15s) | 40.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 1.5 | MPa | ISO 37 |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 930.0 | kg/m³ | ISO 1183 |
Table 3 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 30.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 30.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 25.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 40.0 | % | ISO 815 |
Table 4 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 6
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure (hydraulic) | min. 3 | bar |
| Mould Temperature | 10 - 60 | °C |
| Melt Temperature | 190 - 220 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | Middle - High | — |
Table 6 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Spiral Flow (2 mm wall thickness) | 40.0 | cm |
