ALFATER® XL ECO A75I 2GP0000
MOCOM Compounds ALFATER® XL ECO A75I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with excellent resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for a wide variety of applications, including injection molded parts, extruded parts, coextrusion, seals, sealing lips, handles, racking/shelving, impact protection/shock absorbers, protection caps, soft touch elements, cable ducts, casters, profiles, and 2K components. It also has excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. The service temperature range of this polymer is -40 to 125°C.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Furniture
- Chassis & Brake
- Exterior & Body
- Interior
- Consumer Electronics
- Sensors & Actuators
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL ECO
- Density
- 950.0 - 950.0 kg/m³
- Polymer Name
- PP/EPDM
- Tear Strength
- 37.0 - 37.0 kN/m
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Bio-based, Conflict minerals-free, Low Carbon Footprint (PCF), PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free, Recycled, Sustainable; Azo Colorants-free; Azo Dyes-free; Bio-based; Conflict minerals-free; Low Carbon Footprint (PCF); PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free; Recycled; Sustainable
- Processing Methods
- Coextrusion, Extrusion, Injection Molding
- Color
- Black
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Cost Effective
- Excellent Hydrolysis Resistance
- Flexible
- Good Weather Stability
- Hot Air Resistant
- Ozone Resistant
- Soft
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylene Copolymer
- Polypropylenes (PP)
- Thermoplastic Elastomers (TPE)
- Thermoplastic Polyolefins (TPO)
- Thermoplastic Vulcanizates (TPV)
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Cable Ducts
- Casters
- Construction Applications
- Electrical/Electronic Applications
- Furniture
- Plastics and Elastomers Processing Methods
- Coextrusion
- Extrusion
- Injection Molding
Technical data
Table 1 of 9
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 10.0 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 37.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 520.0 | % | ISO 37 |
| Shore Hardness A (15s) | 75.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 4.0 | MPa | ISO 37 |
Table 2 of 9
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 950.0 | kg/m³ | ISO 1183 |
Table 3 of 9
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 44.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 50.0 | % | ISO 815 |
Table 4 of 9
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 9
1 row| Characteristic | Value | Method |
|---|---|---|
| Tracking Resistance (CTI) | 600.0 | IEC 60112 |
Table 6 of 9
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (1.5 mm) | HB | class | UL 94 |
| Flammability (3.0 mm) | HB | class | UL 94 |
| Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
Table 7 of 9
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Die Temperature | 190 - 210 | °C |
| Melt Temperature | 190 - 230 | °C |
Table 8 of 9
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure (hydraulic) | min. 4 | bar |
| Mould Temperature | 10 - 60 | °C |
| Melt Temperature | 195 - 230 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | High | — |
Table 9 of 9
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 1.7 - 2.1 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1.2 - 1.6 | % | ISO 294-4 |
| Spiral Flow (2 mm wall thickness) | 36.0 | cm | — |
