ALTECH® PP-H FC 1000/100 DS
- Chemical Family
- PolyolefinsPolypropylenes (PP)
MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.
Product families
Applications
- EIFS & Insulation
- Food & Beverage Packaging
- Housings & Enclosures
Product Families
- Polyolefins
Other characteristics
- Brand
- ALTECH
- Polymer Name
- Polypropylene Homopolymer (HPP)
- Additives Included
- Heat Stabilizer, Slip Agent
- Heat Stabilizer
- Slip Agent
- Processing Methods
- Injection Molding
- Markets
- Building & Construction
- Electrical & Electronics
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- Food Contact Acceptable
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Detergent Stabilised
- Excellent Hydrolysis Resistance
- Food Contact Acceptable
- Good Mold Release
- Heat Stabilized
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 80-120 °C for 2-3 h; In an air circulatIng dryer 80-120 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Construction Applications
- Electrical/Electronic Applications
- Food Packaging
- Housings
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 1300.0 | MPa | ISO 178 |
| Flexural Strength | 40.0 | MPa | ISO 178 |
| Tensile Modulus | 1300.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 33.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 10.0 | % | ISO 527 |
| Tensile Elongation at Break | 80.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 17.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 1.5 | kJ/m² | ISO 179/1eA |
Table 2 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 900.0 | kg/m³ | ISO 1183 |
Table 3 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 92.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 62.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 166.0 | °C | ISO 11357 |
Table 4 of 5
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Mould Temperature | 20 - 70 | °C |
| Melt Temperature | 200 - 240 | °C |
Table 5 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 3.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 230.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Shrinkage (Lengthwise, 24h) | 1.2 - 1.5 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1.2 - 1.8 | % | ISO 294-4 |
