ALCOM® HTC 300/1 WT1056-10LD

Chemical Family: Polyesters

MOCOM Compounds ALCOM® HTC 300/1 WT1056-10LD is a high temperature copolyester base polymer which is pre-dried with 90°C in a dry air (dessiccant) dryer for 4-6 hours to a maximum moisture content of <0,03%. It is equipped with a special filler/additive system for light scattering and high light diffusion, and is intended to be utilized in the automotive and lighting market segments for lighting and light transparent components, such as lamp covers, display elements, and operating elements. The process of injection molding requires a melt temperature of 260-280°C and a mold temperature of 50-70°C. Additionally, the product should be stored in a dry and light-protected area.

Product families

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Automotive Lighting

Electrical & Electronics — Devices & Assemblies

Consumer Electronics
Displays

Product Families

Plastics — Engineering & Specialty Polymers

Polyesters & Copolyesters

Other characteristics

Brand: ALCOM
Polymer Name: Copolyester Resin
Fillers Included: Proprietary
Flexural Modulus: 1700.0 - 1700.0 MPa
Processing Methods: Injection Molding
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Technology: Plastics
Labeling Claims: Azo Colorants-free
Azo Dyes-free
Conflict minerals-free
PAH-free
PFOA-free
PFOS-free
Persistent Organic Pollutants (POP)-free
Material Features: Good Light Diffusion
High Light Diffusion
High Temperature Application
Light Diffusing
Light Scattering
Translucent
Storage Condition: Store in dry, protected from light.
Pre-Drying Conditions: 90 °C in a dry air (dessiccant) dryer for 4-6 h
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Plastics and Elastomers End Uses: Automotive Applications
Displays
Lamp Covers
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 8

11 rows

Characteristic	Value	Unit	Method
Flexural Modulus	1700.0	MPa	ISO 178
Flexural Strength	70.0	MPa	ISO 178
Flexural Stress (3.5% Strain)	55.0	MPa	ISO 178
Tensile Modulus	1600.0	MPa	ISO 527
Tensile Stress at Yield	45.0	MPa	ISO 527
Tensile Elongation at Yield	6.0	%	ISO 527
Tensile Elongation at Break	110.0	%	ISO 527
Impact Strength (Charpy, at 23°C)	no break	kJ/m²	ISO 179/1eU
Impact Strength (Charpy, at -40°C)	no break	kJ/m²	ISO 179/1eU
Notched Impact Strength (Charpy, at 23°C)	85.0	kJ/m²	ISO 179/1eA
Notched Impact (Charpy, at -40°C)	10.0	kJ/m²	ISO 179/1eA

Table 2 of 8

1 row

Characteristic	Value	Unit	Method
Density	1180.0	kg/m³	ISO 1183

Table 3 of 8

2 rows

Characteristic	Value	Unit	Method
Vicat B50	105.0	°C	ISO 306
HDT / A (1.8 MPa)	90.0	°C	ISO 75-1/-2

Table 4 of 8

1 row

Characteristic	Value	Unit
Moisture Content	max. 0.03	%

Table 5 of 8

6 rows

Characteristic	Value	Unit	Method
Total Transmission T(Y) (d=1,0mm, A, 2°)	57.5	%	ISO 13468
Total Transmission T(Y) (d=4,0mm, A, 2°)	31.5	%	ISO 13468
Haze T(Y) (d=1.0 mm, A, 2°)	95.0	%	ISO 13468
Haze T(Y) (d=4.0 mm, A, 2°)	95.5	%	ISO 13468
Half Power Angle T(Y) (d=1mm, A, 2°)	48.0	Degree	—
Half Power Angle T(Y) (d=4mm, A, 2°)	65.0	Degree	—

Table 6 of 8

5 rows

Characteristic	Value	Unit	Method
Flammability (0.75 m)	HB	class	UL 94
Flammability (1.5 mm)	HB	class	UL 94
Glow Wire (GWFI, 650°C, 1mm)	Passed	—	DIN EN 60695
Glow Wire (GWFI, 650°C, 2mm)	Passed	—	DIN EN 60695
Glow Wire (GWFI, 650°C, 3mm)	Passed	—	DIN EN 60695

Table 7 of 8