ALCOM® CFX PBT 1000 16072
- Chemical Family
- Polyesters
MOCOM Compounds ALCOM® CFX PBT 1000 16072 is a polybutylene terephthalate with a metallic effect and is used in applications such as housings, bezels, and injection molded parts in the electrical and electronic, building and construction, and sport and leisure markets. For proper use, it must be pre-dried in a dry air (dessiccant) dryer at 100-120°C for 2-4 h, or in an air circulating dryer at 100-120°C for 4-8 h depending on moisture content. Injection molding should be done by melting the material at 250-270°C and molding at 60-100°C. To ensure optimal performance, it should be stored in a light-protected environment and used within a reasonable time.
Product families
Applications
- Consumer Goods — Sports & Recreation
- Housings & Enclosures
Product Families
- Polyesters & Copolyesters
Other characteristics
- Brand
- ALCOM
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Flexural Modulus
- 2600.0 - 2600.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Storage Condition
- Store in dry, protected from light.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 100-120 °C for 2-4 h; In an air circulatIng dryer 100-120 °C for 4-8 h; Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Bezels
- Construction Applications
- Electrical/Electronic Applications
- Housings
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 2600.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 75.0 | MPa | ISO 178 |
| Tensile Modulus | 2500.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 55.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 10.0 | % | ISO 527 |
| Tensile Elongation at Break | 18.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 75.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 65.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 3.5 | kJ/m² | ISO 179/1eA |
Table 2 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1280.0 | kg/m³ | ISO 1183 |
Table 3 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 182.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 54.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 223.0 | °C | ISO 11357 |
Table 4 of 5
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 250 - 270 | °C |
| Mould Temperature | 60 - 100 | °C |
Table 5 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 12.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 250.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Shrinkage (Lengthwise, 24h) | 2.1 - 2.5 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1.9 - 2.3 | % | ISO 294-4 |
