ALFATER® XL A65I 2GP0050
- CAS Number
- 123-11-5
MOCOM Compounds ALFATER® XL A65I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can be adhered to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It has excellent durability and performance.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Furniture
- Chassis & Brake
- Exterior & Body
- Interior
- Consumer Electronics
- Connectors
- Sensors & Actuators
- Terminal Blocks Plugs & Sockets
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 940.0 - 940.0 kg/m³
- Synonyms
4-Anisaldehyde,4-Methoxybenzaldehyde,4-Methoxybenzenecarbaldehyde,Anise Aldehyde,Anisic Aldehyde,p-Anisaldehyde,para-anisaldehyde
- Polymer Name
- PP/EPDM
- Tear Strength
- 25.0 - 25.0 kN/m
- Processing Methods
- Injection Blow Molding, Injection Molding
- Color
- Black
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Excellent Hydrolysis Resistance
- Flexible
- Good Weather Stability
- Hot Air Resistant
- Ozone Resistant
- Soft
- Soft Touch
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylene Copolymer
- Polypropylenes (PP)
- Thermoplastic Elastomers (TPE)
- Thermoplastic Polyolefins (TPO)
- Thermoplastic Vulcanizates (TPV)
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Cable Ducts
- Casters
- Connectors
- Construction Applications
- Electrical/Electronic Applications
- Plastics and Elastomers Processing Methods
- Injection Blow Molding
- Injection Molding
Technical data
Table 1 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 6.0 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 25.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 390.0 | % | ISO 37 |
| Shore Hardness A (15s) | 65.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 2.9 | MPa | ISO 37 |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 940.0 | kg/m³ | ISO 1183 |
Table 3 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coeffecient of Linear Thermal Expansion (parallel) | 9.6 | E⁻⁶/K | ISO 11359-1/-2 |
| Compression Set (22h, at 70°C, 25%, Type A) | 36.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 38.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 20.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 65.0 | % | ISO 815 |
Table 4 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 6
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure (hydraulic) | min. 5 | bar |
| Mould Temperature | 10 - 60 | °C |
| Melt Temperature | 195 - 230 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | High | — |
Table 6 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 2.5 - 2.9 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1.2 - 1.6 | % | ISO 294-4 |
| Spiral Flow (2 mm wall thickness) | 55.0 | cm | — |
