ALCOM® PC 740/1.1 CF10
- Chemical Family
- Polycarbonate (PC)
MOCOM Compounds ALCOM® PC 740/1.1 CF10 is a polycarbonate base polymer with 10% carbon fibers filler/additive system pre-dried under conditions of 120°C in a dry air (dessiccant) dryer for 2-4 hours with a maximum moisture content of less than 0.02%. It has special features, such as being electrically conductive, having reduced surface resistivity, high stiffness, and being heat stabilized. It is used in the machinery market segment for injection molded parts, such as housings and functional components, and the processing injection molding requires a melt temperature of 290-330°C and a mold temperature of 80-130°C.
Product families
Applications
- Housings & Enclosures
Product Families
- Polycarbonates
Other characteristics
- Brand
- ALCOM
- Polymer Name
- Polycarbonate (PC)
- Fillers Included
- Carbon Fiber
- Flexural Modulus
- 6800.0 - 6800.0 MPa
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Electrically Conductive
- Heat Stabilized
- High Stiffness
- Reduced Surface Resistivity
- Storage Condition
- Store in dry, protected from light.
- Pre-Drying Conditions
- 120 °C in a dry air (dessiccant) dryer for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Housings
- Machine/Mechanical Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 8
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 6800.0 | MPa | ISO 178 |
| Flexural Strength | 170.0 | MPa | ISO 178 |
| Tensile Modulus | 7500.0 | MPa | ISO 527 |
| Tensile Strength at Break | 110.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 2.5 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 40.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 45.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 6.5 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 6.0 | kJ/m² | ISO 179/1eA |
Table 2 of 8
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1230.0 | kg/m³ | ISO 1183 |
Table 3 of 8
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 146.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 141.0 | °C | ISO 75-1/-2 |
Table 4 of 8
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.02 | % |
Table 5 of 8
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance | max. 500 | Ohm | IEC 62631-3-2 |
Table 6 of 8
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (0.75 m) | V - 2 | class | UL 94 |
| Flammability (3.0 mm) | V - 0 | class | UL 94 |
| UL Recognition | yes | — | — |
| Yellow Card Available | yes | — | — |
| Glow Wire (GWFI, 850°C, 1mm) | Passed | — | DIN EN 60695 |
| Glow Wire (GWFI, 850°C, 2mm) | Passed | — | DIN EN 60695 |
Table 7 of 8
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 290 - 330 | °C |
| Mould Temperature | 80 - 130 | °C |
Table 8 of 8
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 7.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | — |
| MVR Load | 1.2 | kg | — |
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
