ALFATER® XL A30I 4GP0000
MOCOM Compounds ALFATER® XL A30I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color and bright inherent color. It is widely used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets for injection molded parts such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, and 2K components. Furthermore, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Furniture
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Consumer Electronics
- Sensors & Actuators
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 930.0 - 930.0 kg/m³
- Polymer Name
- PP/EPDM
- Tear Strength
- 12.0 - 12.0 kN/m
- Processing Methods
- Injection Molding
- Color
- Natural
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Excellent Hydrolysis Resistance
- Flexible
- Good Colorability
- Good Flow
- Good Weather Stability
- Heat Aging Resistant
- Hot Air Resistant
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylene Copolymer
- Polypropylenes (PP)
- Thermoplastic Elastomers (TPE)
- Thermoplastic Polyolefins (TPO)
- Thermoplastic Vulcanizates (TPV)
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Cable Ducts
- Construction Applications
- Electrical/Electronic Applications
- Furniture
- Handles
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 2.8 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 12.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 350.0 | % | ISO 37 |
| Shore Hardness A (15s) | 30.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 1.1 | MPa | ISO 37 |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 930.0 | kg/m³ | ISO 1183 |
Table 3 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 25.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 25.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 15.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 30.0 | % | ISO 815 |
Table 4 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 6
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure (hydraulic) | min. 3 | bar |
| Mould Temperature | 10 - 60 | °C |
| Melt Temperature | 190 - 220 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | Middle - High | — |
Table 6 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Spiral Flow (2 mm wall thickness) | 32.0 | cm |
