ALCOM® MS PP 4920 GY1233-20
- Chemical Family
- PolyolefinsPolypropylenes (PP)
MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.
Product families
Applications
- Textile Manufacturing
- Housings & Enclosures
Product Families
- Polyolefins
Other characteristics
- Brand
- ALCOM
- Polymer Name
- Polypropylene Copolymer
- Fillers Included
- Mineral, Talc
- Mineral
- Talc
- Additives Included
- Heat Stabilizer, Impact Modifier, UV Stabilizer
- Heat Stabilizer
- Impact Modifier
- UV Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Good Scratch Resistance
- Heat Stabilized
- Impact Modified
- UV Resistant
- UV Stabilized
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 60-90 °C for 2-4 h; In an air circulatIng dryer 60-90 °C for 2-4 h; Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Fasteners
- Housings
- Textile Applications
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 2100.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 31.0 | MPa | ISO 178 |
| Tensile Modulus | 2100.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 22.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 3.3 | % | ISO 527 |
| Tensile Elongation at Break | 45.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 140.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 40.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 13.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 2.5 | kJ/m² | ISO 179/1eA |
Table 2 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1040.0 | kg/m³ | ISO 1183 |
Table 3 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 64.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 64.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 166.0 | °C | ISO 11357 |
Table 4 of 5
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Mould Temperature | 20 - 70 | °C |
| Melt Temperature | 200 - 270 | °C |
Table 5 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 16.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 230.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Shrinkage (Lengthwise, 24h) | 1 - 1.4 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.9 - 1.3 | % | ISO 294-4 |
