ALFATER® XL A80I 3EF0010
MOCOM Compounds ALFATER® XL A80I 3EF0010 is a thermoplastic vulcanisate (PP+EPDM) with a black color and special features including easy flow, high surface quality, black fulfilling weathering dry, hot (Kalahari, PV3929), black fulfilling weathering moist, hot (Florida, PV3930), good weathering resistance, good chemical resistance, and good ozone and hot air resistance. It is applicable to the automotive, building and construction, electrical and electronic, sport and leisure, and furniture market segments and can be used for injection molded parts, seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, 2K components, and casters. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and has a maximum service temperature range of -40-125°C.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Furniture
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Consumer Electronics
- Sensors & Actuators
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 940.0 - 940.0 kg/m³
- Features
Chemical Resistant, Excellent Hydrolysis Resistance, Flexible, Good Flow, Good Weather Stability, Hot Air Resistant, Ozone Resistant, Soft, Soft Touch, Superior Surface Quality
- Polymer Name
- PP/EPDM
- Tear Strength
- 33.0 - 33.0 kN/m
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Processing Methods
- Injection Molding
- Color
- Black
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Excellent Hydrolysis Resistance
- Flexible
- Good Flow
- Good Weather Stability
- Hot Air Resistant
- Ozone Resistant
- Soft
- Storage Condition
Store in dry, tighlty sealed protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylene Copolymer
- Polypropylenes (PP)
- Thermoplastic Elastomers (TPE)
- Thermoplastic Polyolefins (TPO)
- Thermoplastic Vulcanizates (TPV)
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Cable Ducts
- Casters
- Construction Applications
- Electrical/Electronic Applications
- Furniture
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 6.5 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 33.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 450.0 | % | ISO 37 |
| Shore Hardness A (15s) | 80.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 4.0 | MPa | ISO 37 |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 940.0 | kg/m³ | ISO 1183 |
Table 3 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 45.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 50.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 30.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 68.0 | % | ISO 815 |
Table 4 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 6
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure (hydraulic) | min. 3 | bar |
| Mould Temperature | 10 - 60 | °C |
| Melt Temperature | 190 - 220 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | Middle - High | — |
Table 6 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 1.6 - 2 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.9 - 1.3 | % | ISO 294-4 |
| Spiral Flow (2 mm wall thickness) | 65.0 | cm | — |
