ALTECH® PP-H A 4940/506 MR40
- Chemical Family
- PolyolefinsPolypropylenes (PP)
MOCOM Compounds ALTECH® PP-H A 4940/506 MR40 is a polypropylene homopolymer suitable for processing injection molding. It contains a filler/additive system of 40% talcum which provides processing stabilization, easy release (demolding), slip agent, and heat stabilization. Typical applications include housings and functional components for the automotive, building and construction markets, such as pump components, filter systems, and fixtures/fittings. For optimal results, this product should be stored in a dry, light-protected environment not exceeding 30°C.
Product families
Applications
- Housings & Enclosures
Product Families
- Polyolefins
Other characteristics
- Brand
- ALTECH
- Polymer Name
- Polypropylene Homopolymer (HPP)
- Fillers Included
- Mineral, Talc
- Mineral
- Talc
- Additives Included
Heat Stabilizer, Processing Stabilizer, Slip Agent; Heat Stabilizer; Processing Stabilizer; Slip Agent
- Processing Methods
- Injection Molding
- Markets
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Good Mold Release
- Heat Stabilized
- Processing Stability
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 80-120 °C for 2-3 h; In an air circulatIng dryer 80-120 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Construction Applications
- Filter Systems
- Fittings
- Fixtures
- Housings
- Pump Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 5100.0 | MPa | ISO 178 |
| Flexural Strength | 50.0 | MPa | ISO 178 |
| Tensile Modulus | 4300.0 | MPa | ISO 527 |
| Tensile Strength at Break | 30.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 3.7 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 20.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 10.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 2.5 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 2.0 | kJ/m² | ISO 179/1eA |
Table 2 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1260.0 | kg/m³ | ISO 1183 |
Table 3 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 100.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 102.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 163.0 | °C | ISO 11357 |
Table 4 of 5
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Mould Temperature | 20 - 70 | °C |
| Melt Temperature | 200 - 250 | °C |
Table 5 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 9.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 230.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Shrinkage (Lengthwise, 24h) | 0.5 - 0.7 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1 - 1.2 | % | ISO 294-4 |
