ALTECH® PA6 A 2050/560 GF50
- Chemical Family
- Polyamides
MOCOM Compounds ALTECH® PA6 A 2050/560 GF50 is a polyamide 6 reinforced with 50% glass fibers. It is a high heat stabilized, easy release (demolding), easy flow, injection molding grade suitable for automotive, electrical and electronic applications, such as engine and drive systems, exterior parts, electrical components, interior decoration/finishing, and injection molded parts. Typical applications include functional components, different automotive powertrain parts, and air ducts.
Product families
Applications
- Cooling & Climate
- Exterior & Body
- Interior
- Powertrain & UTH
Product Families
- Polyamides
Other characteristics
- Brand
- ALTECH
- End Uses
Air Ducts, Automotive Applications, Automotive Exterior Parts, Automotive Interior Parts, Drive Systems, Electrical Components, Electrical/Electronic Applications, Engine Systems
- Features
- Good Flow, Good Mold Release, Heat Stabilized
- Functions
- Resin
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Good Flow
- Good Mold Release
- Heat Stabilized
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Air Ducts
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Drive Systems
- Electrical Components
- Electrical/Electronic Applications
- Engine Systems
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 14500.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 9800.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 320.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 210.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 16000.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 10000.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 210.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 3.0 | % | ISO 527 |
| Tensile Strength at Break (Conditioned) | 137.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 4.5 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 95.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 92.0 | kJ/m² | ISO 179/1eU |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1570.0 | kg/m³ | ISO 1183 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 216.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 220.0 | °C | ISO 11357 |
Table 4 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.15 | % |
Table 5 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 270 - 290 | °C |
| Mould Temperature | 80 - 100 | °C |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
