ALTECH® PA66 A 2035/507 GF35 EF
- Chemical Family
- Polyamides
MOCOM Compounds ALTECH® PA66 A 2035/507 GF35 EF is a polyamide 66 with a 35% glass fiber filler/additive system. It has hot oil resistance, improved surface appearance, easy release (demolding), and easy flow. Additionally, it is heat stabilized and used for automotive powertrain components, engine cover, and other applications in engine and drive systems in the automotive market segment.
Product families
Applications
- Powertrain & UTH
Product Families
- Polyamides
Other characteristics
- Brand
- ALTECH
- Functions
- Resin
- Polymer Name
- Polyamide 66 (PA 66)
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Material Features
- Good Flow
- Good Mold Release
- Good Surface Appearance
- Heat Aging Resistant
- Heat Stabilized
- Hot Oil Resistant
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Drive Systems
- Engine Covers
- Engine Systems
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 9800.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 6750.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 270.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 160.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 11500.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 7000.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 190.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 3.0 | % | ISO 527 |
| Tensile Strength at Break (Conditioned) | 130.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 6.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 85.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 100.0 | kJ/m² | ISO 179/1eU |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1410.0 | kg/m³ | ISO 1183 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 250.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 260.0 | °C | ISO 11357 |
Table 4 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.15 | % |
Table 5 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 280 - 300 | °C |
| Mould Temperature | 80 - 120 | °C |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.6 - 0.8 | % | ISO 294-4 |
