ALTECH® PA66 A 3030/109 GB30
- Chemical Family
- Polyamides
MOCOM Compounds ALTECH® PA66 A 3030/109 GB30 is a polyamide 66 with a 30% glass bead filler/additive system that is heat stabilized and has easy flow, easy release (demolding), high surface quality, and low warpage. For processing injection molding, the melt temperature must be between 280-300°C and the mold temperature should be between 80-120°C. This material can be used in various applications and should be stored in a dark place at temperatures not exceeding 30°C.
Product families
- Polyamides
Other characteristics
- Brand
- ALTECH
- Features
Good Flow, Good Mold Release, Heat Stabilized, Low Warpage, Superior Surface Quality
- Functions
- Resin
- Polymer Name
- Polyamide 66 (PA 66)
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Fillers Included
- Glass Bead
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Technology
- Plastics
- Material Features
- Good Flow
- Good Mold Release
- Heat Stabilized
- Low Warpage
- Superior Surface Quality
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 4300.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 120.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 4800.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 80.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 4.2 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 25.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Dry, Charpy, at -40°C) | 20.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 3.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Dry, Charpy, at -40°C) | 2.0 | kJ/m² | ISO 179/1eA |
Table 2 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1350.0 | kg/m³ | ISO 1183 |
Table 3 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 94.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 263.0 | °C | ISO 11357 |
Table 4 of 7
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.15 | % |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (Dry, 1.5 mm) | HB | class | UL 94 |
| UL Recognition (Dry) | yes | — | — |
| Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
Table 6 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 280 - 300 | °C |
| Mould Temperature | 80 - 120 | °C |
Table 7 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 1.3 - 1.7 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1.1 - 1.5 | % | ISO 294-4 |
