ALTECH® PA6 FC 2030/100 GF30
- CAS Number
- 127-68-4
- Chemical Family
- Polyamides
MOCOM Compounds ALTECH® PA6 FC 2030/100 GF30 is a polyamide 6 reinforced with 30% glass fibers and heat stabilized for easy release (demolding) and processing stability. It is suitable for application areas such as injection molded parts and food contact, and is used in markets such as electrical and electronic, building and construction, sport and leisure, and food processing industry. Typical applications include housings and kitchenware. For injection molding, the recommended melt temperature is between 270-290°C, and the mold temperature should be between 80-100°C.
Product families
Applications
- Consumer Goods — Housewares
- Consumer Goods — Sports & Recreation
- Equipment & Parts
- Housings & Enclosures
Product Families
- Polyamides
Other characteristics
- Brand
- ALTECH
- Functions
- Resin
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer, Processing Stabilizer
- Heat Stabilizer
- Processing Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- Food Contact Acceptable
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Food Contact Acceptable
- Good Mold Release
- Heat Stabilized
- Processing Stability
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Construction Applications
- Electrical/Electronic Applications
- Food Preparation Equipment
- Housings
- Kitchenware
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 8500.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 5300.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 240.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 155.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 9300.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 5800.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 165.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 3.4 | % | ISO 527 |
| Tensile Strength at Break (Conditioned) | 105.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 6.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 75.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 90.0 | kJ/m² | ISO 179/1eU |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1360.0 | kg/m³ | ISO 1183 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 215.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 220.0 | °C | ISO 11357 |
Table 4 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.15 | % |
Table 5 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 270 - 290 | °C |
| Mould Temperature | 80 - 100 | °C |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.6 - 0.8 | % | ISO 294-4 |
