ALTECH® PA6 A 1000/199 BK1129-12LS
- Chemical Family
- Polyamides
MOCOM Compounds ALTECH® PA6 A 1000/199 BK1129-12LS is a polyamide 6 base polymer with fast solidifying, easy release (demolding), and easy flow properties. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. It is suitable for market segments such as automotive and typical applications including housings, handles, functional components, and injection molded parts. It is also laser etchable (light etching) and should be kept dry and stored in a location where the temperature is no higher than 30°C.
Product families
Applications
- Exterior & Body
- Interior
- Housings & Enclosures
Product Families
- Polyamides
Other characteristics
- Brand
- ALTECH
- Features
Fast Solidifying, Good Flow, Good Mold Release, Laser Etchable, Laser Markable
- Functions
- Resin
- Polymer Name
- Polyamide 6 (PA 6)
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Plastics
- Material Features
- Fast Solidifying
- Good Flow
- Good Mold Release
- Laser Etchable
- Laser Markable
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Handles
- Housings
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 2800.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 900.0 | MPa | ISO 178 |
| Flexural Stress (Dry, 3.5% Strain) | 90.0 | MPa | ISO 178 |
| Flexural Stress (Conditioned, 3.5% Strain) | 25.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 3200.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 1000.0 | MPa | ISO 527 |
| Tensile Stress at Yield (Dry) | 81.0 | MPa | ISO 527 |
| Tensile Stress at Yield (Conditioned) | 45.0 | MPa | ISO 527 |
| Tensile Elongation at Yield (Dry) | 3.5 | % | ISO 527 |
| Tensile Elongation at Yield (Conditioned) | 22.0 | % | ISO 527 |
| Tensile Elongation at Break (Dry) | 15.0 | % | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 200.0 | % | ISO 527 |
Table 2 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1130.0 | kg/m³ | ISO 1183 |
Table 3 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 65.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 220.0 | °C | ISO 11357 |
Table 4 of 7
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.15 | % |
Table 5 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (Dry, 1.5 mm) | V - 2 | class | UL 94 |
| Flammability (Dry, 3 mm) | V - 2 | class | UL 94 |
| UL Recognition (Dry) | yes | — | — |
| Yellow Card Available (Dry) | yes | — | — |
Table 6 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 250 - 270 | °C |
| Mould Temperature | 40 - 80 | °C |
Table 7 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 1 - 1.2 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 1.2 - 1.4 | % | ISO 294-4 |
