ALTECH® ABS A 1000/106 GY1117-20

CAS Number: 52255-49-9
Chemical Family: Acrylonitrile Butadiene Styrene (ABS), StyrenicsAcrylonitrile Butadiene Styrene (ABS)Styrenics

MOCOM Compounds ALTECH® ABS A 1000/106 GY1117-20 is a copolymer of Acrylonitrile/Butadiene/Styrene with special features of easy flow and injection molding grade. It is suitable for personal care and hygiene products such as sanitary articles and thin walled parts. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 h and 80°C in an air circulating dryer for 3-6 h depending on moisture content, with a maximum moisture content of <0.20%. Processing Injection molding should be done at a melt temperature of 200-240°C and a mold temperature of 50-80°C.

Product families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: ALTECH
Functions: Resin
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Labeling Claims: Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
Processing Methods: Injection Molding
Certifications & Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006, IATF 16949, ISO 13485, ISO 14001, ISO 17025, ISO 45001, ISO 50001, ISO 9001, REACH (Europe), REACH (UK), RoHS Compliant, SVHC Compliant
Markets: Consumer Goods
Applications: Consumer Goods — Housewares
Technology: Plastics
Material Features: Good Flow
Storage Condition: Store in dry, protected from light not above 30°C.
Pre-Drying Conditions: 80 °C in a dry air (dessiccant) dryer for 2-4 h
80 °C in an air circulating dryer for 3-6 h
Dependant on moisture content
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Plastics and Elastomers End Uses: Hygiene
Sanitary Ware
Thin-walled Parts
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

11 rows

Characteristic	Value	Unit	Method
Flexural Modulus	2500.0	MPa	ISO 178
Flexural Stress (3.5% Strain)	66.0	MPa	ISO 178
Tensile Modulus	2300.0	MPa	ISO 527
Tensile Stress at Yield	44.0	MPa	ISO 527
Tensile Elongation at Yield	2.2	%	ISO 527
Tensile Elongation at Break	15.0	%	ISO 527
Impact Strength (Charpy, at 23°C)	85.0	kJ/m²	ISO 179/1eU
Impact Strength (Charpy, at -40°C)	70.0	kJ/m²	ISO 179/1eU
Notched Impact Strength (Charpy, at 23°C)	17.0	kJ/m²	ISO 179/1eA
Notched Impact (Charpy, at -40°C)	6.5	kJ/m²	ISO 179/1eA
Ball Indentation Hardness (H358/30)	107.0	MPa	ISO 2039-1

Table 2 of 6

1 row

Characteristic	Value	Unit	Method
Density	1060.0	kg/m³	ISO 1183

Table 3 of 6

2 rows

Characteristic	Value	Unit	Method
Vicat B50	92.0	°C	ISO 306
HDT / A (1.8 MPa)	82.0	°C	ISO 75-1/-2

Table 4 of 6