ALTECH® ABS A 1000/627 UV
MOCOM Compounds ALTECH® ABS A 1000/627 UV is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with special features such as high heat stabilization, good flow, processing stabilization, injection molding grade, low emission, and UV stabilization. It is used for injection molded parts in various market segments with excellent performance.
Product families
- Styrenics
Other characteristics
- Brand
- ALTECH
- Features
Good Flow, Heat Stabilized, Low Emissions, Processing Stability, UV Resistant, UV Stabilized
- Functions
- Resin
- Polymer Name
- Acrylonitrile Butadiene Styrene (ABS)
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Additives Included
Heat Stabilizer, Processing Stabilizer, UV Stabilizer; Heat Stabilizer; Processing Stabilizer; UV Stabilizer
- Processing Methods
- Injection Molding
- Technology
- Plastics
- Material Features
- Good Flow
- Heat Stabilized
- Low Emissions
- Processing Stability
- UV Resistant
- UV Stabilized
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 3-6 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 2380.0 | MPa | ISO 178 |
| Flexural Strength | 75.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 72.0 | MPa | ISO 178 |
| Tensile Modulus | 2350.0 | MPa | ISO 527 |
| Tensile Strength | 45.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 48.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 3.0 | % | ISO 527 |
| Tensile Elongation at Break | 7.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 12.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 5.0 | kJ/m² | ISO 179/1eA |
Table 2 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1070.0 | kg/m³ | ISO 1183 |
Table 3 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 105.0 | °C | ISO 306 |
Table 4 of 7
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.2 | % |
Table 5 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (0.75 m) | HB | class | UL 94 |
| Flammability (1.5 mm) | HB | class | UL 94 |
| Flammability (3.0 mm) | HB | class | UL 94 |
| Glow Wire (GWFI, 650°C, 1mm) | Passed | — | DIN EN 60695 |
| Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
| Glow Wire (GWFI, 650°C, 3mm) | Passed | — | DIN EN 60695 |
Table 6 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 200 - 240 | °C |
| Mould Temperature | 50 - 80 | °C |
Table 7 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 20.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 220.0 | °C | — |
| MVR Load | 10.0 | kg | — |
| Shrinkage (24h) | min. 0.6 | % | ISO 294-4 |
