ALTECH® ABS A 1000/106 GY1116-20

CAS Number: 52255-49-9
Chemical Family: Acrylonitrile Butadiene Styrene (ABS), StyrenicsAcrylonitrile Butadiene Styrene (ABS)Styrenics

MOCOM Compounds ALTECH® ABS A 1000/106 GY1116-20 is a pre-drying acrylonitrile/butadiene/styrene/copolymer with special features of easy flow and injection molding grade. It is typically used for sanitary articles, thin walled parts and other hygiene products and injection molded parts. For processing injection molding, the melt temperature should range from 200-240°C and the mold temperature should range from 50-80°C. The maximum moisture content should be less than 0.20%. For pre-drying conditions, the material should be dried in a dry air (dessiccant) dryer at 80°C for 2-4 hours, or in an air circulating dryer at 80°C for 3-6 hours depending on the moisture content.

Product families

Plastics — Basic Thermoplastics

Styrenics

Other characteristics

Brand: ALTECH
Functions: Resin
Polymer Name: Acrylonitrile Butadiene Styrene (ABS)
Labeling Claims: Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
Processing Methods: Injection Molding
Certifications & Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006, IATF 16949, ISO 13485, ISO 14001, ISO 17025, ISO 45001, ISO 50001, ISO 9001, REACH (Europe), REACH (UK), RoHS Compliant, SVHC Compliant
Markets: Consumer Goods
Applications: Consumer Goods — Housewares
Technology: Plastics
Material Features: Good Flow
Storage Condition: Store in dry, protected from light not above 30°C.
Pre-Drying Conditions: 80 °C in a dry air (dessiccant) dryer for 2-4 h
80 °C in an air circulating dryer for 3-6 h
Dependant on moisture content
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Plastics and Elastomers End Uses: Hygiene
Sanitary Ware
Thin-walled Parts
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

11 rows

Characteristic	Value	Unit	Method
Flexural Modulus	2500.0	MPa	ISO 178
Flexural Stress (3.5% Strain)	66.0	MPa	ISO 178
Tensile Modulus	2300.0	MPa	ISO 527
Tensile Stress at Yield	44.0	MPa	ISO 527
Tensile Elongation at Yield	2.2	%	ISO 527
Tensile Elongation at Break	15.0	%	ISO 527
Impact Strength (Charpy, at 23°C)	85.0	kJ/m²	ISO 179/1eU
Impact Strength (Charpy, at -40°C)	70.0	kJ/m²	ISO 179/1eU
Notched Impact Strength (Charpy, at 23°C)	17.0	kJ/m²	ISO 179/1eA
Notched Impact (Charpy, at -40°C)	6.5	kJ/m²	ISO 179/1eA
Ball Indentation Hardness (H358/30)	107.0	MPa	ISO 2039-1

Table 2 of 6

1 row

Characteristic	Value	Unit	Method
Density	1060.0	kg/m³	ISO 1183

Table 3 of 6

2 rows

Characteristic	Value	Unit	Method
Vicat B50	92.0	°C	ISO 306
HDT / A (1.8 MPa)	82.0	°C	ISO 75-1/-2

Table 4 of 6