ALTECH® PC A 1000/526 UV
- Chemical Family
- Polycarbonate (PC)
MOCOM Compounds ALTECH® PC A 1000/526 UV is a polycarbonate-based injection molding grade with a light stabilizer, antistatic, and UV stabilized filler/additive system. It is pre-dried in a dry air (dessiccant) dryer at 120°C for 2-3 hours and in an air circulating dryer at 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of 0.02%. It is then processed in injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C, and has special features such as easy release (demolding) and processing stabilization. Typical applications of this material include various injection molded parts that require light stabilization, antistatic protection and UV stabilization.
Product families
- Polycarbonates
Other characteristics
- Brand
- ALTECH
- Features
Anti-Static, Good Mold Release, Light Stabilized, Processing Stability, UV Resistant, UV Stabilized
- Functions
- Resin
- Polymer Name
- Polycarbonate (PC)
- Additives Included
Anti-Static Agent, Light Stabilizer, Processing Stabilizer, UV Stabilizer; Anti-Static Agent; Light Stabilizer; Processing Stabilizer; UV Stabilizer
- Processing Methods
- Injection Molding
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Anti-Static
- Good Mold Release
- Light Stabilized
- Processing Stability
- UV Resistant
- UV Stabilized
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
In an air circulatIng dryer 100-120 °C for 4-12 h; Dependant on moisture content; 120 °C in a dry air (dessiccant) dryer for 2-3 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2500.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 65.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 6.0 | % | ISO 527 |
| Tensile Elongation at Break | 100.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 10.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 10.0 | kJ/m² | ISO 179/1eA |
Table 2 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1200.0 | kg/m³ | ISO 1183 |
Table 3 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 140.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 125.0 | °C | ISO 75-1/-2 |
Table 4 of 7
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.02 | % |
Table 5 of 7
1 row| Characteristic | Value | Method |
|---|---|---|
| Glow Wire (GWFI, 850°C, 2mm) | Passed | DIN EN 60695 |
Table 6 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 270 - 310 | °C |
| Mould Temperature | 80 - 110 | °C |
Table 7 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 17.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | — |
| MVR Load | 1.2 | kg | — |
| Shrinkage (24h) | 0.5 - 0.8 | % | ISO 294-4 |
