ALTECH® PA66 A 2030/106 GF30
- Chemical Family
- Polyamides
MOCOM Compounds ALTECH® PA66 A 2030/106 GF30 is a heat-stabilized, high-surface-gloss polyamide 66 reinforced with 30% glass fibers. It is used in various market segments such as automotive, sport, and leisure for injection-molded parts and interior decoration/finishing. Typical applications include housings. Injection molding of this material requires a melt temperature of 280-300°C and a mold temperature of 80-120°C.
Product families
Applications
- Consumer Goods — Sports & Recreation
- Interior
- Housings & Enclosures
Product Families
- Polyamides
Other characteristics
- Brand
- ALTECH
- End Uses
Automotive Applications, Automotive Interior Parts, Housings, Sporting Goods
- Features
- Good Surface Gloss, Heat Stabilized
- Functions
- Resin
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Good Surface Gloss
- Heat Stabilized
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Interior Parts
- Housings
- Sporting Goods
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 9200.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 6000.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 280.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 190.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 10000.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 6300.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 180.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 4.1 | % | ISO 527 |
| Tensile Strength at Break (Conditioned) | 118.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 5.6 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 65.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 85.0 | kJ/m² | ISO 179/1eU |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1360.0 | kg/m³ | ISO 1183 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 255.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 263.0 | °C | ISO 11357 |
Table 4 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.15 | % |
Table 5 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 280 - 300 | °C |
| Mould Temperature | 80 - 120 | °C |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.7 - 0.9 | % | ISO 294-4 |
