ALTECH® PA66 A 2033/500 GF33
- Chemical Family
- Polyamides
MOCOM Compounds ALTECH® PA66 A 2033/500 GF33 is a polyamide 66 reinforced with 33% glass fibers, providing special features such as hot oil resistance, improved surface appearance, easy release (demolding), and easy flow. It is pre-dried with conditions of 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. The melt temperature for injection molding is 280-300°C and the mold temperature is 80-120°C. This product is used in automotive applications such as engine and drive systems, exterior parts, and interior decoration/finishing, making it an ideal material for automotive components.
Product families
Applications
- Exterior & Body
- Interior
Product Families
- Polyamides
Other characteristics
- Brand
- ALTECH
- Functions
- Resin
- Polymer Name
- Polyamide 66 (PA 66)
- Labeling Claims
Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Certifications & Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006, IATF 16949, ISO 13485, ISO 14001, ISO 17025, ISO 45001, ISO 50001, ISO 9001, REACH (Europe), REACH (UK), RoHS Compliant, SVHC Compliant
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Material Features
- Good Flow
- Good Mold Release
- Good Surface Appearance
- Heat Stabilized
- Hot Oil Resistant
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Drive Systems
- Engine Systems
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 8800.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 5600.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 275.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 180.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 10200.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 6000.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 175.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 3.5 | % | ISO 527 |
| Tensile Strength at Break (Conditioned) | 110.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 6.3 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 85.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 93.0 | kJ/m² | ISO 179/1eU |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1390.0 | kg/m³ | ISO 1183 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 244.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 261.0 | °C | ISO 11357 |
Table 4 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.15 | % |
Table 5 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 280 - 300 | °C |
| Mould Temperature | 80 - 120 | °C |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.7 - 0.9 | % | ISO 294-4 |
