TEDUR® L 9412-3.2
- Chemical Family
- Polyphenylene Sulfide (PPS)
MOCOM Compounds TEDUR® L 9412-3.2 is a polyphenylene sulfide-based compound containing 10% carbon fibers, 10% graphite, and 10% PTFE. It is used in various industries such as automotive, machinery, electrical, and electronic industries for functional components, housings, bearings, and sliding elements. This compound has enhanced electrical conductivity, sliding, and wear due to its reduced surface resistivity. For pre-drying, a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content with a maximum moisture content of 0.02% should be used. For injection molding, a melt temperature of 320-340°C and a mold temperature of over 140°C is required.
Product families
Applications
- Housings & Enclosures
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- TEDUR
- Polymer Name
- Polyphenylene Sulfide (PPS)
- Fillers Included
- Carbon Fiber, Graphite, Mineral, PTFE
- Carbon Fiber
- Graphite
- Mineral
- PTFE
- Flexural Modulus
- 11900.0 - 11900.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Electrical & Electronics
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Electrically Conductive
- Good Flow
- Good Sliding Properties
- High Temperature Resistance
- Improved Wear
- Reduced Surface Resistivity
- Storage Condition
- Store in dry, protected from light.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 130-140 °C for 2-4 h; Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Bearings
- Electrical/Electronic Applications
- Housings
- Machine/Mechanical Parts
- Sliding Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 11900.0 | MPa | ISO 178 |
| Flexural Strength | 180.0 | MPa | ISO 178 |
| Tensile Modulus | 13900.0 | MPa | ISO 527 |
| Flexural Deflection (Maximum Force) | 1.7 | % | ISO 178 |
| Tensile Strength at Break | 135.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 1.3 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 20.0 | kJ/m² | ISO 179/1eU |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1490.0 | kg/m³ | ISO 1183 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (1.8 MPa) | 273.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 280.0 | °C | ISO 11357 |
Table 4 of 6
1 row| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | max. 0.02 | % |
Table 5 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance | max. 150 | Ohm | IEC 62631-3-2 |
Table 6 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Mould Temperature | min. 140 | °C |
| Melt Temperature | 320 - 340 | °C |
