TEDUR® L PPS FT 2545 NC1083-20

Chemical Family: Polyphenylene Sulfide (PPS)

MOCOM Compounds TEDUR® L PPS FT 2545 NC1083-20 is a base polymer of Polyphenylene Sulfide, filled/additive system of 30% glass fibers and 15% PTFE, with special features of high purity and stiffness. It is typically used for injection molding parts such as fuel cells. Pre-drying conditions include drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours. Processing injection molding requires a melt temperature of 320-340°C and mold temperature of more than 140°C.

Product families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: TEDUR
Polymer Name: Polyphenylene Sulfide (PPS)
Fillers Included: Glass Fiber, PTFE
Glass Fiber
PTFE
Flexural Modulus: 9800.0 - 9800.0 MPa
Processing Methods: Injection Molding
Technology: Plastics
Labeling Claims: Azo Colorants-free
Azo Dyes-free
Conflict minerals-free
PAH-free
PFOA-free
PFOS-free
Persistent Organic Pollutants (POP)-free
Material Features: Good Flow
High Purity
High Stiffness
High Temperature Resistance
Storage Condition: Store in dry, protected from light not above 30°C.
Pre-Drying Conditions: In a dry air (dessiccant) dryer 130-140 °C for 2-4 h
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Plastics and Elastomers End Uses: Fuel Cells
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 5

6 rows

Characteristic	Value	Unit	Method
Flexural Modulus	9800.0	MPa	ISO 178
Flexural Strength	195.0	MPa	ISO 178
Tensile Modulus	10500.0	MPa	ISO 527
Tensile Strength at Break	130.0	MPa	ISO 527
Tensile Elongation at Break	2.0	%	ISO 527
Impact Strength (Charpy, at 23°C)	35.0	kJ/m²	ISO 179/1eU

Table 2 of 5

1 row

Characteristic	Value	Unit	Method
Density	1680.0	kg/m³	ISO 1183

Table 3 of 5

2 rows

Characteristic	Value	Unit	Method
HDT / A (1.8 MPa)	269.0	°C	ISO 75-1/-2
DSC (Melt Point)	280.0	°C	ISO 11357

Table 4 of 5