TEDUR® L 9200-1

Chemical Family: Polyphenylene Sulfide (PPS)

MOCOM Compounds TEDUR® L 9200-1 is a base polymer of Polyphenylene Sulfide that has a filler/additive system of 60% glass fiber/mineral and is known for its high toughness. It is typically used for automotive seals and various applications. For pre-drying, it should be dried in a dry air (dessiccant) dryer for 2-4 hours at 130-140°C, depending on moisture content. For injection molding, the melt temperature should be 320-340°C and the mold temperature should be greater than 140°C.

Product families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: TEDUR
Polymer Name: Polyphenylene Sulfide (PPS)
Fillers Included: Glass/Mineral, Mineral
Glass/Mineral
Mineral
Flexural Modulus: 17000.0 - 17000.0 MPa
Processing Methods: Injection Molding
Technology: Plastics
Labeling Claims: Azo Colorants-free
Azo Dyes-free
Conflict minerals-free
PAH-free
PFOA-free
PFOS-free
Persistent Organic Pollutants (POP)-free
Material Features: Excellent Toughness
Good Flow
High Temperature Resistance
Storage Condition: Store in dry, protected from light not above 30°C.
Pre-Drying Conditions: In a dry air (dessiccant) dryer 130-140 °C for 2-4 h; Dependant on moisture content
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Plastics and Elastomers End Uses: Automotive Applications
Seals
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

7 rows

Characteristic	Value	Unit	Method
Flexural Modulus	17000.0	MPa	ISO 178
Flexural Strength	250.0	MPa	ISO 178
Tensile Modulus	17000.0	MPa	ISO 527
Flexural Deflection (Maximum Force)	1.6	%	ISO 178
Tensile Strength at Break	150.0	MPa	ISO 527
Tensile Elongation at Break	1.2	%	ISO 527
Impact Strength (Charpy, at 23°C)	30.0	kJ/m²	ISO 179/1eU

Table 2 of 6

1 row

Characteristic	Value	Unit	Method
Density	1900.0	kg/m³	ISO 1183

Table 3 of 6

2 rows

Characteristic	Value	Unit	Method
HDT / A (1.8 MPa)	275.0	°C	ISO 75-1/-2
DSC (Melt Point)	280.0	°C	ISO 11357

Table 4 of 6