ALFATER® XL ECO D50I 2GP0000

CAS Number: 110-65-6

MOCOM Compounds ALFATER® XL ECO D50I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is used for injection molded and blow molded parts such as seals, sealing lips, handles, racking/shelving, impact protection/shock absorber, protection caps, cable ducts, bellows, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general and is used in the automotive, building and construction, electrical and electronic, machinery, and furniture markets.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Furniture

Automotive & Transportation — Automotive

Chassis & Brake
Exterior & Body
Interior
Powertrain & UTH

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Electrical & Electronics — Parts & Components

Sensors & Actuators

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Vulcanizates (TPV)

Other characteristics

Brand: ALFATER® XL ECO
Density: 990.0 - 990.0 kg/m³
Polymer Name: PP/EPDM
Tear Strength: 93.0 - 93.0 kN/m
Labeling Claims: Azo Colorants-free, Azo Dyes-free, Bio-based, Conflict minerals-free, Low Carbon Footprint (PCF), PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free, Recycled, Sustainable; Azo Colorants-free; Azo Dyes-free; Bio-based; Conflict minerals-free; Low Carbon Footprint (PCF); PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free; Recycled; Sustainable
Processing Methods: Blow Molding, Injection Blow Molding, Injection Molding
Color: Black
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Technology: Elastomers
Material Features: Chemical Resistant
Cost Effective
Excellent Hydrolysis Resistance
Flexible
Good Weather Stability
Hot Air Resistant
Ozone Resistant
Soft
Storage Condition: Store in dry, protected from light tightly sealed.
Pre-Drying Conditions: In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Compatible Polymers and Resins: Polyethylenes (PE)
Polypropylene Copolymer
Polypropylenes (PP)
Thermoplastic Elastomers (TPE)
Thermoplastic Polyolefins (TPO)
Thermoplastic Vulcanizates (TPV)
Plastics and Elastomers End Uses: Automotive Applications
Automotive Exterior Parts
Automotive Interior Parts
Bellows
Cable Ducts
Construction Applications
Electrical/Electronic Applications
Furniture
Plastics and Elastomers Processing Methods: Blow Molding
Injection Blow Molding
Injection Molding

Technical data

Table 1 of 8

5 rows

Characteristic	Value	Unit	Method
Tensile Strength (Type 2)	14.9	MPa	ISO 37
Tear Strength (Method Ba)	93.0	kN/m	ISO 34-1
Elongation at Break (Type 2)	500.0	%	ISO 37
Shore Hardness D (15s)	50.0	—	ISO 868
Tensile Stress at 100% Elongation (Type 2)	12.7	MPa	ISO 37

Table 2 of 8

1 row

Characteristic	Value	Unit	Method
Density	990.0	kg/m³	ISO 1183

Table 3 of 8

4 rows

Characteristic	Value	Unit	Method
Compression Set (22h, at 70°C, 25%, Type A)	80.0	%	ISO 815
Compression Set (22h, at 100°C, 25%, Type A)	87.0	%	ISO 815
Compression Set (72h, at 22°C, 25%, Type A)	70.0	%	ISO 815
Compression Set (72h, at 125°C, 25%, Type A)	98.0	%	ISO 815

Table 4 of 8

2 rows

Characteristic	Value	Unit
Service Temperature (depending on load, geometry, etc.)	- 40 to 125	°C
Moisture Content	max. 0.1	%

Table 5 of 8