ALFATER® XL ECO D40 2GP0000

CAS Number: 35545-57-4

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Furniture

Automotive & Transportation — Automotive

Chassis & Brake
Cooling & Climate
Exterior & Body
Interior
Powertrain & UTH

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Electrical & Electronics — Parts & Components

Sensors & Actuators

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Vulcanizates (TPV)

Other characteristics

Brand: ALFATER® XL ECO
Density: 970.0 - 970.0 kg/m³
Polymer Name: PP/EPDM
Tear Strength: 73.0 - 73.0 kN/m
Processing Methods: Blow Molding, Coextrusion, Extrusion, Injection Blow Molding, Injection Molding
Color: Black
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Technology: Elastomers
Labeling Claims: Azo Colorants-free
Azo Dyes-free
Bio-based
Conflict minerals-free
Low Carbon Footprint (PCF)
PFOA-free
PFOS-free
Persistent Organic Pollutants (POP)-free
Fillers Included: Mineral
Material Features: Chemical Resistant
Cost Effective
Excellent Hydrolysis Resistance
Flexible
Good Weather Stability
Hot Air Resistant
Ozone Resistant
Soft
Storage Condition: Store in dry, protected from light tightly sealed.
Pre-Drying Conditions: In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Compatible Polymers and Resins: Polyethylenes (PE)
Polypropylene Copolymer
Polypropylenes (PP)
Thermoplastic Elastomers (TPE)
Thermoplastic Polyolefins (TPO)
Thermoplastic Vulcanizates (TPV)
Plastics and Elastomers End Uses: Air Ducts
Automotive Applications
Automotive Exterior Parts
Automotive Interior Parts
Bellows
Cable Ducts
Cable Guides
Cable Jacketing
Plastics and Elastomers Processing Methods: Blow Molding
Coextrusion
Extrusion
Injection Blow Molding
Injection Molding

Technical data

Table 1 of 7

5 rows

Characteristic	Value	Unit	Method
Tensile Strength (Type 2)	14.5	MPa	ISO 37
Tear Strength (Method Ba)	73.0	kN/m	ISO 34-1
Elongation at Break (Type 2)	550.0	%	ISO 37
Shore Hardness D (15s)	40.0	—	ISO 868
Tensile Stress at 100% Elongation (Type 2)	8.8	MPa	ISO 37

Table 2 of 7

1 row

Characteristic	Value	Unit	Method
Density	970.0	kg/m³	ISO 1183

Table 3 of 7

4 rows

Characteristic	Value	Unit	Method
Compression Set (22h, at 70°C, 25%, Type A)	70.0	%	ISO 815
Compression Set (22h, at 100°C, 25%, Type A)	78.0	%	ISO 815
Compression Set (72h, at 22°C, 25%, Type A)	55.0	%	ISO 815
Compression Set (72h, at 125°C, 25%, Type A)	94.0	%	ISO 815

Table 4 of 7

2 rows

Characteristic	Value	Unit
Service Temperature (depending on load, geometry, etc.)	- 40 to 125	°C
Moisture Content	max. 0.1	%

Table 5 of 7