ALFATER® XL A90I 2GP0050
MOCOM Compounds ALFATER® XL A90I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used for injection molding. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Furniture
- Chassis & Brake
- Exterior & Body
- Interior
- Seating
- Consumer Electronics
- Connectors
- Sensors & Actuators
- Terminal Blocks Plugs & Sockets
Product Families
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- ALFATER® XL
- Density
- 950.0 - 950.0 kg/m³
- End Uses
Automotive Applications, Automotive Exterior Parts, Automotive Interior Parts, Cable Ducts, Casters, Connectors, Construction Applications, Electrical/Electronic Applications, Fasteners, Furniture, Handles, Machine/Mechanical Parts, Plugs, Protective Caps, Sealing Lip, Seals, Shock Absorbers, Soft Touch Applications
- Features
Chemical Resistant, Excellent Hydrolysis Resistance, Flexible, Good Weather Stability, Hot Air Resistant, Ozone Resistant, Soft, Soft Touch
- Polymer Name
- PP/EPDM
- Tear Strength
- 48.0 - 48.0 kN/m
- Processing Methods
- Injection Blow Molding, Injection Molding
- Color
- Black
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Fillers Included
- Mineral
- Material Features
- Chemical Resistant
- Excellent Hydrolysis Resistance
- Flexible
- Good Weather Stability
- Hot Air Resistant
- Ozone Resistant
- Soft
- Soft Touch
- Storage Condition
Store in dry, protected from light tightly sealed.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylene Copolymer
- Polypropylenes (PP)
- Thermoplastic Elastomers (TPE)
- Thermoplastic Polyolefins (TPO)
- Thermoplastic Vulcanizates (TPV)
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Cable Ducts
- Casters
- Connectors
- Construction Applications
- Electrical/Electronic Applications
- Plastics and Elastomers Processing Methods
- Injection Blow Molding
- Injection Molding
Technical data
Table 1 of 8
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (Type 2) | 10.4 | MPa | ISO 37 |
| Tear Strength (Method Ba) | 48.0 | kN/m | ISO 34-1 |
| Elongation at Break (Type 2) | 500.0 | % | ISO 37 |
| Shore Hardness A (15s) | 90.0 | — | ISO 868 |
| Tensile Stress at 100% Elongation (Type 2) | 6.4 | MPa | ISO 37 |
Table 2 of 8
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 950.0 | kg/m³ | ISO 1183 |
Table 3 of 8
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set (22h, at 70°C, 25%, Type A) | 51.0 | % | ISO 815 |
| Compression Set (22h, at 100°C, 25%, Type A) | 60.0 | % | ISO 815 |
| Compression Set (72h, at 22°C, 25%, Type A) | 37.0 | % | ISO 815 |
| Compression Set (72h, at 125°C, 25%, Type A) | 76.0 | % | ISO 815 |
Table 4 of 8
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C |
| Moisture Content | max. 0.1 | % |
Table 5 of 8
1 row| Characteristic | Value | Method |
|---|---|---|
| Tracking Resistance (CTI) | 600.0 | IEC 60112 |
Table 6 of 8
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flammability (1.5 mm) | HB | class | UL 94 |
| Flammability (3.0 mm) | HB | class | UL 94 |
| Glow Wire (GWFI, 750°C, 2mm) | Passed | — | DIN EN 60695 |
Table 7 of 8
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Back Pressure (hydraulic) | min. 5 | bar |
| Mould Temperature | 10 - 70 | °C |
| Melt Temperature | 200 - 240 | °C |
| Holding Pressure (of injection pressure) | 50 - 70 | % |
| Injection Speed | High | — |
Table 8 of 8
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 1.4 - 1.8 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.9 - 1.3 | % | ISO 294-4 |
| Spiral Flow (2 mm wall thickness) | 55.0 | cm | — |
