ALFATER® XL D40I 4FC0010

Name: ALFATER® XL D40I 4FC0010
Brand: ALFATER® XL

MOCOM Compounds ALFATER® XL D40I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for food contact and compliant with EN 71-3. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance with an easy flow. It is suitable for usage in packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, protection caps, caps/closures, containers, and kitchenware.

Product families

Applications

Consumer Goods — Housewares
Consumer Goods — Sports & Recreation

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Printing & Packaging — Packaging

Food & Beverage Packaging

Electrical & Electronics — Parts & Components

Sensors & Actuators

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Vulcanizates (TPV)

Other characteristics

Brand: ALFATER® XL
Density: 950.0 - 950.0 kg/m³
End Uses: Caps, Closures, Containers, Food Packaging, Food Preparation Equipment, Handles, Household Goods, Kitchenware, Protective Caps, Sealing Lip, Seals, Toys
Features: Chemical Resistant, Excellent Hydrolysis Resistance, Flexible, Food Contact Acceptable, Good Colorability, Good Flow, Good Weather Stability, Hot Air Resistant, Ozone Resistant, Soft
Polymer Name: PP/EPDM
Tear Strength: 74.0 - 74.0 kN/m
Processing Methods: Injection Molding
Color: Blue
Markets: Consumer Goods
Electrical & Electronics
Industrial
Printing & Packaging
Technology: Elastomers
Labeling Claims: Azo Colorants-free
Azo Dyes-free
Conflict minerals-free
Food Contact Acceptable
PAH-free
PFOA-free
PFOS-free
Persistent Organic Pollutants (POP)-free
Fillers Included: Mineral
Material Features: Chemical Resistant
Excellent Hydrolysis Resistance
Flexible
Food Contact Acceptable
Good Colorability
Good Flow
Good Weather Stability
Hot Air Resistant
Storage Condition: Store in dry, protected from light tightly sealed.
Pre-Drying Conditions: In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; EN 71/III; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Compatible Polymers and Resins: Polyethylenes (PE)
Polypropylene Copolymer
Polypropylenes (PP)
Thermoplastic Elastomers (TPE)
Thermoplastic Polyolefins (TPO)
Thermoplastic Vulcanizates (TPV)
Plastics and Elastomers End Uses: Caps
Closures
Containers
Food Packaging
Food Preparation Equipment
Handles
Household Goods
Kitchenware
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 6

5 rows

Characteristic	Value	Unit	Method
Tensile Strength (Type 2)	11.3	MPa	ISO 37
Tear Strength (Method Ba)	74.0	kN/m	ISO 34-1
Elongation at Break (Type 2)	400.0	%	ISO 37
Shore Hardness D (15s)	40.0	—	ISO 868
Tensile Stress at 100% Elongation (Type 2)	9.5	MPa	ISO 37

Table 2 of 6

1 row

Characteristic	Value	Unit	Method
Density	950.0	kg/m³	ISO 1183

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Compression Set (22h, at 70°C, 25%, Type A)	70.0	%	ISO 815
Compression Set (22h, at 100°C, 25%, Type A)	80.0	%	ISO 815
Compression Set (72h, at 22°C, 25%, Type A)	48.0	%	ISO 815
Compression Set (72h, at 125°C, 25%, Type A)	92.0	%	ISO 815

Table 4 of 6

2 rows

Characteristic	Value	Unit
Service Temperature (depending on load, geometry, etc.)	- 40 to 125	°C
Moisture Content	max. 0.1	%

Table 5 of 6