ALFATER® XL D40I 2GP0050

Name: ALFATER® XL D40I 2GP0050
Brand: ALFATER® XL

MOCOM Compounds ALFATER® XL D40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used in injection molding and is available in natural color and black. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery and furniture applications, and can be used for seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners, and connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

Product families

Applications

Consumer Goods — Appliances & Electronics
Consumer Goods — Furniture

Automotive & Transportation — Automotive

Chassis & Brake
Exterior & Body
Interior
Seating

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Electrical & Electronics — Parts & Components

Connectors
Sensors & Actuators
Terminal Blocks Plugs & Sockets

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Vulcanizates (TPV)

Other characteristics

Brand: ALFATER® XL
Density: 960.0 - 960.0 kg/m³
Polymer Name: PP/EPDM
Tear Strength: 75.0 - 75.0 kN/m
Labeling Claims: Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free; Azo Colorants-free; Azo Dyes-free; Conflict minerals-free; PAH-free; PFOA-free; PFOS-free; Persistent Organic Pollutants (POP)-free
Processing Methods: Injection Blow Molding, Injection Molding
Color: Black
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Technology: Elastomers
Fillers Included: Mineral
Material Features: Chemical Resistant
Excellent Hydrolysis Resistance
Flexible
Good Weather Stability
Hot Air Resistant
Ozone Resistant
Soft
Storage Condition: Store in dry, protected from light tightly sealed.
Pre-Drying Conditions: In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
Certifications and Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
Compatible Polymers and Resins: Polyethylenes (PE)
Polypropylene Copolymer
Polypropylenes (PP)
Thermoplastic Elastomers (TPE)
Thermoplastic Polyolefins (TPO)
Thermoplastic Vulcanizates (TPV)
Plastics and Elastomers End Uses: Automotive Applications
Automotive Exterior Parts
Automotive Interior Parts
Cable Ducts
Casters
Connectors
Construction Applications
Electrical/Electronic Applications
Plastics and Elastomers Processing Methods: Injection Blow Molding
Injection Molding

Technical data

Table 1 of 6

5 rows

Characteristic	Value	Unit	Method
Tensile Strength (Type 2)	16.5	MPa	ISO 37
Tear Strength (Method Ba)	75.0	kN/m	ISO 34-1
Elongation at Break (Type 2)	570.0	%	ISO 37
Shore Hardness D (15s)	40.0	—	ISO 868
Tensile Stress at 100% Elongation (Type 2)	10.5	MPa	ISO 37

Table 2 of 6

1 row

Characteristic	Value	Unit	Method
Density	960.0	kg/m³	ISO 1183

Table 3 of 6

4 rows

Characteristic	Value	Unit	Method
Compression Set (22h, at 70°C, 25%, Type A)	67.0	%	ISO 815
Compression Set (22h, at 100°C, 25%, Type A)	77.0	%	ISO 815
Compression Set (72h, at 22°C, 25%, Type A)	47.0	%	ISO 815
Compression Set (72h, at 125°C, 25%, Type A)	92.0	%	ISO 815

Table 4 of 6

2 rows

Characteristic	Value	Unit
Service Temperature (depending on load, geometry, etc.)	- 40 to 125	°C
Moisture Content	max. 0.1	%

Table 5 of 6