ALCOM® PA66 910/1.1 CF10 PTFE20
- Chemical Family
- Polyamides
MOCOM Compounds ALCOM® PA66 910/1.1 CF10 PTFE20 is a polyamide 66 base polymer with a 10% carbon fiber and 20% PTFE filler/additive system that provides improved sliding/wear, heat stabilization, reduced surface resistivity, and electrical conductivity. It is suitable for injection molding processing at a melt temperature of 280-300°C and mold temperature of 80-120°C, and is used in the automotive and machinery markets for functional components, bearings, and sliding elements. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 h dependant on moisture content, and it should be stored dry, protected from light and temperatures not exceeding 30°C. It should be handled with care to prevent contamination or damage.
Product families
- Polyamides
Other characteristics
- Brand
- ALCOM
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Carbon Fiber, PTFE
- Carbon Fiber
- PTFE
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Electrically Conductive
- Good Sliding Properties
- Heat Stabilized
- Improved Wear
- Reduced Surface Resistivity
- Wear Resistant
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-12 h
- Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Bearings
- Machine/Mechanical Parts
- Sliding Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 9100.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 6200.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 220.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 155.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 11000.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 7300.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 155.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 2.4 | % | ISO 527 |
| Tensile Strength at Break (Conditioned) | 110.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 4.1 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 40.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 50.0 | kJ/m² | ISO 179/1eU |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1300.0 | kg/m³ | ISO 1183 |
Table 3 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 252.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 263.0 | °C | ISO 11357 |
Table 4 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance (Conditioned) | max. 500 | Ohm | IEC 62631-3-2 |
Table 5 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 280 - 300 | °C |
| Mould Temperature | 80 - 120 | °C |
Table 6 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.4 - 0.6 | % | ISO 294-4 |
