ALCOM® PA66 910/1.1 CF10 PTFE10
- Chemical Family
- Polyamides
MOCOM Compounds ALCOM® PA66 910/1.1 CF10 PTFE10 is a polyamide 66 base polymer with 10% carbon fibers and 10% PTFE, improved sliding/wear, heat stabilized, electrically conductive, and reduced surface resistivity. It is used for injection molded parts in the automotive and machinery markets, such as functional components. Pre-drying conditions should be in a dry air (dessiccant) dryer at temperatures below 80°C for 2-12 hours, depending on moisture content. For processing, injection molding should be done with a melt temperature of 280-300°C and a mold temperature of 80-120°C.
Product families
- Polyamides
Other characteristics
- Brand
- ALCOM
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Carbon Fiber, PTFE
- Carbon Fiber
- PTFE
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Electrically Conductive
- Good Sliding Properties
- Good Tribological Properties
- Heat Stabilized
- Improved Wear
- Reduced Surface Resistivity
- Wear Resistant
- Storage Condition
- Store in dry, protected from light.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer <80 °C for 2-12 h; Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Machine/Mechanical Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (Dry) | 7900.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 230.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 9400.0 | MPa | ISO 527 |
| Tensile Strength at Break (Dry) | 160.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 3.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 37.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Dry, Charpy, at -40°C) | 31.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Dry, Charpy, at -40°C) | 3.5 | kJ/m² | ISO 179/1eA |
Table 2 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Dry) | 1230.0 | kg/m³ | ISO 1183 |
Table 3 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT / A (Dry, 1.8 MPa) | 251.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 262.0 | °C | ISO 11357 |
Table 4 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance (Conditioned) | max. 400 | Ohm | IEC 62631-3-2 |
Table 5 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 280 - 300 | °C |
| Mould Temperature | 80 - 120 | °C |
Table 6 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Sliding Friction µ (pv = 5*1 MPa*m/s) | 0.25 | — | ASTM G 137 |
| Coefficient of Sliding Friction µH (pv = 5*1 MPa*m/s) | 0.3 | — | ASTM G 137 |
| Specific Wear Rate ws (pv = 5*1 MPa*m/s) | 0.37 | E⁻⁶ mm³/Nm | ASTM G 137 |
| Linear Wear Rate w (pv = 5*1 MPa*m/s) | 6.6 | µm/h | ASTM G 137 |
Table 7 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.6 - 0.8 | % | ISO 294-4 |
