To catalogue
ALCOM® PBT 700/1 GF30 PTFE15
- Chemical Family
- Polyesters
MOCOM Compounds ALCOM® PBT 700/1 GF30 PTFE15 is a polybutylene terephthalate base polymer with 30% glass fibers and 15% PTFE, offering improved sliding/wear, high stiffness, and typically used for functional components, bearings, and sliding elements in the automotive and machinery market segments.
Product families
Applications
Automotive & Transportation — Automotive
- Powertrain & UTH
Product Families
Plastics — Engineering & Specialty Polymers
- Polyesters & Copolyesters
Other characteristics
- Brand
- ALCOM
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Fillers Included
- Glass Fiber, PTFE
- Glass Fiber
- PTFE
- Flexural Modulus
- 9300.0 - 9300.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Labeling Claims
- Azo Colorants-free
- Azo Dyes-free
- Conflict minerals-free
- PAH-free
- PFOA-free
- PFOS-free
- Persistent Organic Pollutants (POP)-free
- Material Features
- Good Sliding Properties
- Good Tribological Properties
- High Stiffness
- Improved Wear
- Wear Resistant
- Storage Condition
Store in dry, protected from light not above 30°C.
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 100-120 °C for 2-4 h; In an air circulatIng dryer 100-120 °C for 4-8 h; Dependant on moisture content
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); EC No.1907/2006; IATF 16949; ISO 13485; ISO 14001; ISO 17025; ISO 45001; ISO 50001; ISO 9001; REACH (Europe); REACH (UK); RoHS Compliant; SVHC Compliant
- Plastics and Elastomers End Uses
- Automotive Applications
- Bearings
- Gear Wheels
- Machine/Mechanical Parts
- Roller Bearings
- Sliding Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus | 9300.0 | MPa | ISO 178 |
| Flexural Strength | 200.0 | MPa | ISO 178 |
| Tensile Modulus | 10400.0 | MPa | ISO 527 |
| Tensile Strength at Break | 125.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 2.8 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 60.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 70.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 9.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 8.5 | kJ/m² | ISO 179/1eA |
Table 2 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1650.0 | kg/m³ | ISO 1183 |
Table 3 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat B50 | 214.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 210.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 225.0 | °C | ISO 11357 |
Table 4 of 6
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Temperature | 250 - 270 | °C |
| Mould Temperature | 80 - 120 | °C |
Table 5 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Sliding Friction µ (pv = 5*1 MPa*m/s) | 0.3 | — | ASTM G 137 |
| Coefficient of Sliding Friction µH (pv = 5*1 MPa*m/s) | 0.23 | — | ASTM G 137 |
| Specific Wear Rate ws (pv = 5*1 MPa*m/s) | 1.5 | E⁻⁶ mm³/Nm | ASTM G 137 |
| Linear Wear Rate w (pv = 5*1 MPa*m/s) | 27.0 | µm/h | ASTM G 137 |
Table 6 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Index (MVR) | 8.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 260.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Shrinkage (Lengthwise, 24h) | 0.1 - 0.3 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.8 - 1 | % | ISO 294-4 |
