Petkim PETILEN YY S00750
- Chemical Family
- PolyethylenesPolyolefins
Petkim PETILEN YY S00750 is a high density polyethylene resin having medium molecular weight distribution. The product is developed for medium size blow molding applications.
Product families
Applications
- Other Building Materials
- Pipes & Plumbing
- Industrial & Transport Packaging
- Non-Food Consumer Packaging
- Jacketing & Insulation
Product Families
- Polyolefins
Other characteristics
- Polymer Name
- High Density Polyethylene (HDPE)
- Melt Flow Index
- 0.076 - 0.076 g/10 min
- Processing Methods
- Blow Molding
- Markets
- Building & Construction
- Electrical & Electronics
- Printing & Packaging
- Storage
Inappropriate storage conditions can lead to bad smell, color changes and the deterioration in physical properties. It is advised to process PE resins within 6 months after delivery.
- PACKAGING
The material is packaged in PE bags or in PP Big Bags. The product should be stored in a dry area with an ambient temperature below 50°C. It should be kept away from sunlight, sparks, heat and flame.
- Recycling
The product is not hazardous or toxic and it is suitable for recycling using available recycling methods
- Technology
- Plastics
- Labeling Claims
- Non-Hazardous
- Non-Toxic
- Recyclable
- Certifications and Compliance
- Regulation (EU) No. 10/2011 (PIM)
- Plastics and Elastomers End Uses
- Blown Containers
- Bottles
- Conduit
- Containers
- Cosmetic Packaging
- Pipes
- Plastics and Elastomers Functions
- Resin
- Recommended Processing Conditions
Blow molding applications;; Typical barrel temperature: 180 - 200°C; Typical melt temperature: 190 - 210°C; Processing conditions should be optimized for different equipment design
- Plastics and Elastomers Processing Methods
- Blow Molding
Technical data
Table 1 of 3
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 24 | MPa | ASTM D638 |
| Tensile Strength at Break | 31 | MPa | ASTM D638 |
| Elongation at Break | 875 | % | ASTM D638 |
| Flexural Modulus, 23°C | 950 | MPa | TS EN ISO 179 |
| Izod Impact Strength at 23°C (notched) | 380 | J/m | ASTM D256 |
| Hardness | 63 | Shore D | ASTM D2240 |
| Environmental Stress Crack Resistance (10% Igepal, F50) | min. 1000 | h | ASTM D1693 |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (190°C/2.16 kg) | 0.076 | g/10 min | ASTM D1238 |
| Density, 23°C | 0.95 | g/cm³ | ASTM D1505 |
| Melting Point (DSC, 2nd heating) | 134 | °C | ASTM D3418 |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat Softening Point, 10 N | 128 | g/10 min | ASTM D1525 |
