Petkim PETILEN H5-21T
- Chemical Family
- PolyethylenesPolyolefins
Petkim PETILEN H5-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H5-21T contains no additives.
Product families
Applications
- Consumer Goods — Housewares
- Consumer Goods — Sports & Recreation
- Food & Beverage Packaging
- Non-Food Consumer Packaging
- Film & Foil Coatings
- Film & Foil Coatings
- Other Specialty Coatings
Product Families
- Polyolefins
Other characteristics
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 4.7 - 4.7 g/10 min
- Processing Methods
Compounding, Extrusion, Extrusion Coating, Injection Molding
- Markets
- Consumer Goods
- Paints & Coatings
- Printing & Packaging
- Storage
Inappropriate storage conditions can lead to bad smell, color changes and the deterioration in physical properties. It is advised to process PE resins within 6 months after delivery
- PACKAGING
The material is packaged in PE bags or in PP Big Bags. The product should be stored in a dry area with an ambient temperature below 50°C. It should be kept away from sunlight, sparks, heat and flame.
- Recycling
The product is not hazardous or toxic and it is suitable for recycling using available recycling methods.
- Technology
- Plastics
- Labeling Claims
- Non-Hazardous
- Non-Toxic
- Recyclable
- Certifications and Compliance
- Regulation (EU) No. 10/2011 (PIM)
- Plastics and Elastomers End Uses
- Caps
- Closures
- Cosmetic Packaging
- Foil Coatings
- Kitchenware
- Thin Coatings
- Toys
- Plastics and Elastomers Functions
- Resin
- Recommended Processing Conditions
- Extrusion coating applications;
- Typical melt temperature
- 280-330°CInjection molding applications;
- Typical melt temperature
- 180 - 230°C
- Typical mold temperature
- 10 - 40°C
- Processing conditions should be optimized for different equipment design.
- Plastics and Elastomers Processing Methods
- Compounding
- Extrusion
- Extrusion Coating
- Injection Molding
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 8 | MPa | ASTM D638 |
| Tensile Strength at Break | 12 | MPa | ASTM D638 |
| Elongation at Break | 625 | % | ASTM D638 |
| Hardness | 46 | Shore D | ASTM D2240 |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (190°C/2.16 kg) | 4.7 | g/10 min | ASTM D1238 |
| Density, 23°C | 0.921 | g/cm³ | ASTM D1505 |
| Melting Point (DSC, 2nd heating) | 108 | °C | ASTM D3418 |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat Softening Point, 10 N | 89 | °C | ASTM D1525 |
