Petkim PETILEN YY I468(UV)
- Chemical Family
- PolyethylenesPolyolefins
Petkim PETILEN YY I468(UV) is a high density polyethylene resin developed for injection molding applications. Having narrow molecular weight distribution, PETILEN YY I468(UV) is an ideal raw material for the manufacture of products requiring rigidity and toughness. The resin is stabilized against UV radiation to allow prolonged exposure to sunlight.
Product families
Applications
- Consumer Goods — Housewares
- Electrical & Electronic Systems
- Industrial & Transport Packaging
- Other Packaging Materials
Product Families
- Polyolefins
Other characteristics
- Polymer Name
- High Density Polyethylene (HDPE)
- Melt Flow Index
- 4.0 - 4.0 g/10 min
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Consumer Goods
- Printing & Packaging
- Storage
Inappropriate storage conditions can lead to bad smell, color changes and the deterioration in physical properties. It is advised to process PE resins within 6 months after delivery
- PACKAGING
The material is packaged in PE bags or in PP Big Bags. The product should be stored in a dry area with an ambient temperature below 50°C. It should be kept away from sunlight, sparks, heat and flame.
- Recycling
The product is not hazardous or toxic and it is suitable for recycling using available recycling methods
- Technology
- Plastics
- Labeling Claims
- Non-Hazardous
- Non-Toxic
- Recyclable
- Material Features
- Excellent Toughness
- High Rigidity
- Narrow Molecular Weight Distribution
- UV Stabilized
- Certifications and Compliance
- Regulation (EU) No. 10/2011 (PIM)
- Plastics and Elastomers End Uses
- Battery Cases
- Crates
- Pallets
- Rigid Films
- Rigid Packaging
- Plastics and Elastomers Functions
- Resin
- Recommended Processing Conditions
- Injection molding applications;
- Typical melt temperature
- 200 - 260°C
- Typical mold temperature
- 10 - 40°C
- Typical injection pressure
- As high as possible
- Processing conditions should be optimized for different equipment design.
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 3
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 30 | MPa | ASTM D638 |
| Tensile Strength at Break | 17 | MPa | ASTM D638 |
| Elongation at Break | 1000 | % | ASTM D638 |
| Flexural Modulus, 23°C | 1200 | MPa | TS EN ISO 178 |
| Izod Impact Strength at 23°C (notched) | 50 | J/m | ASTM D256 |
| Hardness | 65 | Shore D | ASTM D2240 |
| Environmental Stress Crack Resistance (10% Igepal, F50) | 4 | h | ASTM D1693 |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (190°C/2.16 kg) | 4 | g/10 min | ASTM D1238 |
| Density, 23°C | 0.965 | g/cm | ASTM D1505 |
| Melting Point (DSC, 2nd heating) | 134 | °C | ASTM D3418 |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat Softening Point, 10 N | 124 | °C | ASTM D1525 |
