To catalogue
Petkim PETILEN H2-21T
- Chemical Family
- PolyethylenesPolyolefins
Petkim PETILEN H2-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H2-21T contains no additives.
Product families
Applications
Applications
- Consumer Goods — Cold-Chain & Insulation
Agriculture & Feed — Agricultural Films
- Pipes & Hoses
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Building & Construction — Decorative Materials & Finishes
- Wallcoverings & Decorative Laminates
Printing & Packaging — Packaging
- Industrial & Transport Packaging
- Other Packaging Materials
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 2.5 - 2.5 g/10 min
- Processing Methods
- Coating, Extrusion, Film Extrusion
- Markets
- Agriculture & Feed
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Printing & Packaging
- Storage
Inappropriate storage conditions can lead to bad smell, color changes and the deterioration in physical properties. It is advised to process PE resins within 6 months after delivery.
- PACKAGING
The material is packaged in PE bags or in PP Big Bags. The product should be stored in a dry area with an ambient temperature below 50°C. It should be kept away from sunlight, sparks, heat and flame.
- Recycling
The product is not hazardous or toxic and it is suitable for recycling using available recycling methods.
- Technology
- Plastics
- Labeling Claims
- Non-Hazardous
- Non-Toxic
- Recyclable
- Certifications and Compliance
- Regulation (EU) No. 10/2011 (PIM)
- Plastics and Elastomers End Uses
- Cables
- Film
- Flexible Packaging
- Heavy Duty Bags
- Laminates
- Microfoamed Sheet
- Pipe Extrusion Applications
- Rigid Films
- Plastics and Elastomers Functions
- Resin
- Recommended Processing Conditions
- Blown film extrusion applications;
- Typical zone temperatures
- 140 - 180°C
- Typical melt temperature
- 160 - 180°C
- Typical blow-up ratio (BUR)
- 2:1 - 3:1
- Processing conditions should be optimized for different equipment design.
- Plastics and Elastomers Processing Methods
- Coating
- Extrusion
- Film Extrusion
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (190°C/2.16 kg) | 2.5 | g/10 min | ASTM D1238 |
| Density, 23°C | 0.921 | g/cm | ASTM D1239 |
| Melting Point (DSC, 2nd heating) | 108 | °C | ASTM D1240 |
Table 2 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat Softening Point, 10 N | 89 | °C | ASTM D1525 |
Table 3 of 4
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield, MD | 11 | MPa | ASTM D1241 |
| Tensile Strength at Yield, TD | 10 | MPa | ASTM D1242 |
| Tensile Strength at Break, MD | 23 | MPa | ASTM D1243 |
| Tensile Strength at Break, TD | 17 | MPa | ASTM D1244 |
| Elongation at Break, MD | min. 200 | % | ASTM D1245 |
| Elongation at Break, TD | min. 500 | % | ASTM D1246 |
| Tear Strength, MD | 250 | cN | ASTM D1247 |
| Tear Strength, TD | 220 | cN | ASTM D1248 |
| Dart Drop Impact, F53 | 115 | g | ASTM D1249 |
| Coefficient of Friction | min. 1 | — | ASTM D1250 |
Table 4 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Haze | 6.8 | % | ASTM D1251 |
| Gloss at 45° | 67 | GU | ASTM D1252 |
