Petkim PETILEN I10-19T
- Chemical Family
- PolyethylenesPolyolefins
Petkim PETILEN I10-19T is a high flow low density polyethylene resin, produced by high pressure tubular process. Itis developed for injection molding and compounding applications. PETILEN I10-19T contains no additives.
Product families
Applications
- Consumer Goods — Housewares
- Consumer Goods — Sports & Recreation
- Non-Food Consumer Packaging
Product Families
- Polyolefins
Other characteristics
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 10.0 - 10.0 g/10 min
- Processing Methods
- Compounding, Injection Molding
- Markets
- Consumer Goods
- Printing & Packaging
- Storage
Inappropriate storage conditions can lead to bad smell, color changes and the deterioration in physical properties. It is advised to process PE resins within 6 months after delivery
- PACKAGING
The material is packaged in PE bags or in PP Big Bags. The product should be stored in a dry area with an ambient temperature below 50°C. It should be kept away from sunlight, sparks, heat and flame.
- Technology
- Plastics
- Labeling Claims
- Non-Hazardous
- Non-Toxic
- Recyclable
- Material Features
- High Flow
- Certifications and Compliance
- Regulation (EU) No. 10/2011 (PIM)
- Plastics and Elastomers End Uses
- Caps
- Closures
- Cosmetic Packaging
- Kitchenware
- Toys
- Plastics and Elastomers Functions
- Resin
- Recommended Processing Conditions
Injection molding applications;Typical melt temperature: 180 - 230°CTypical mold temperature: 10 - 40°C Processing conditions should be optimized for different equipment design.
- Plastics and Elastomers Processing Methods
- Compounding
- Injection Molding
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 8 | MPa | ASTM D638 |
| Tensile Strength at Break | 10 | MPa | ASTM D638 |
| Elongation at Break | 500 | % | ASTM D638 |
| Hardness | 45 | Shore D | ASTM D2240 |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Rate (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Density, 23°C | 0.919 | g/cm³ | ASTM D1505 |
| Melting Point (DSC, 2nd heating) | 107 | °C | ASTM D3418 |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Vicat Softening Point, 10 N | 84 | °C | ASTM D1525 |
