Aegis® PIR-H55ZI
- Chemical Family
- Polyamides
Aegis® PIR-H55ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZI, its standard, non-recycled counterpart. Aegis® PIR-H55ZI is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monfilament and multifilament applications as well as carpet fiber.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Consumer Goods — Apparel; Consumer Goods — Carpet & Upholstery; Consumer Goods — Footwear; Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Sports & Recreation
- Aftermarket Parts & Components
- Interior
- Powertrain & UTH
- Equipment & Parts
- Automotive Electronics
- Textile Manufacturing
- Non-Food Consumer Packaging
- Applicators & Accessories
- Coated Paper & Paperboard
Product Families
- Recycled Polymers
- Polyamides
Other characteristics
- Brand
- Aegis® PIR
- Density
- 1,130.0 kg/m³
- Polymer Name
- Polyamide 6 (PA 6)
- Labeling Claims
- Contains PIR Resin, Recycled, Sustainable
- Contains PIR Resin
- Recycled
- Sustainable
- Processing Methods
- Extrusion
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Personal Care
- Printing & Packaging
- Technology
- Plastics
- Material Features
- Good Processability
- High Performance
- Homopolymer
- Medium Viscosity
- Processing Guidelines
Material Handling. Aegis® PIR-H55ZI is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing issues. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C(176°F) is recommended. Drying time is dependent on moisture level. More information about safe handling procedures can be obtained by requesting the Safety Data Sheet.
- Plastics and Elastomers End Uses
- Automotive Applications
- BCF Multifilament
- Carpet Fiber
- Fans
- Front Spoiler
- Gears
- Industrial Applications
- Levers
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Point | 220 (428) | ºC (ºF) | ASTM D-3418 |
| Typical Density | 1.13 | g/cm³ | ASTM D-1505 |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 96% SAV | 2.72 | — | — |
| Extractable Content | max. 1.2 | % | SOP-702-307 |
| Moisture Content | max. 0.08 | % | ASTM D-6869 |
| Viscosity (FAV) | 55 ± 3 | — | ASTM D-789 |
