Aegis® H120ZP
- Chemical Family
- Polyamides
Aegis® H120ZP resin is a high viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. It combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Product families
Applications
- Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Sports & Recreation
- Food & Beverage Packaging
- Industrial & Transport Packaging
- Food & Beverage Packaging
Product Families
- Polyamides
Other characteristics
- Brand
- Aegis®
- Polymer Name
- Polyamide 6 (PA 6)
- Processing Methods
- Extrusion
- Markets
- Consumer Goods
- Food & Nutrition
- Healthcare & Pharma
- Printing & Packaging
- Technology
- Plastics
- Extrusion Guidelines
Melt Viscosity vs. Temperature; Melt Temperature: 220°C (428°F) Melt Temperature Range: 232°C (450°F) to 271°C (520°F). Two key factors affect the melt viscosity (stiffness or fluidity of the melt):; The molecular weight (Mw) of the resin: Higher Mw resins will have a higher melt viscosity than lower Mw resins.; Temperature of the melt for any given Mw resin: Higher process temperatures will provide a more fluid melt viscosity than lower process temperatures.; Typical Barrel Profile for Cast Films; Barrel: 230-260°C (446-500°F) Adapter: 260-266°C (500-510°F) Die: 260°C (500°F) Process Melt Temperature: 260-270°C (500-518°F); Typical Barrel Profile for Tubular (Blown) Films; Barrel: 246-254°C (474-490°F) Adapter: 260°C (500°F) Die: 254°C (490°F) Process Melt Temperature: 254-260°C (490-500°F); Screw Parameters; Metering Section: 40% Transition Section: 3 to 4 flights Feed Section: Balance of screw length Compression Ratio: 3.5:1 to 4.0:1 L/D Ratio: 24:1; Metering Section Flight Depth
- Processing Guidelines
Material Handling. Aegis® H120ZP homopolymer is supplied in sealed containers and drying prior to processing is not required. However, high moisture is the primary cause of processing problems. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level.
- Regulatory Compliance
AdvanSix has more than 50 years of experience in the development and production of packaging resin that is safe and reliable for consumers and businesses. Aegis® packaging resins are manufactured to meet the stringent standards required of materials involved in the processing, handling and packaging of food. They meet all applicable U.S. Food and Drug Administration (FDA) and European Union (EU) food grade regulations, as outlined in FDA 21 CFR 177.1500 and Regulation (EU) No. 10/2011.
- Plastics and Elastomers End Uses
- Balloons
- Book Covers
- Fans
- Film
- Flexible Packaging
- Food Packaging
- Form Fill Seal Packaging
- Front Spoiler
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 2
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity FAV | 120 | — | ASTM D-789 |
| RV (at 96% Sulfuric Acid) | 3.6 | — | — |
| Extractable Content | max. 0.8 | % | SOP-702-307 |
| Density | 1.13 | g/cm3 | ASTM D-792 |
| Melt Flow Rate (at 235°C/1.0 kg (455°F/1.0 kg)) | 1.9 | g/10 min | ASTM D-1238 |
| Moisture Content | max. 0.08 | % | ASTM D-6869 |
| Moisture (24 Hour) | 1.6 | % | ASTM D-570 |
| Moisture (50% RH) | 2.7 | % | ASTM D-570 |
| Moisture (Saturation) | 9.5 | % | ASTM D-570 |
| Melting Point | 220 (428) | °C (°F) | ASTM D-3418 |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Oxygen Permeability (at 23°C (73°F)/0% RH) | 40.3 (2.6) | cc.25μm/m²/day (cc.mil/100 in²/day) | D-3958 |
| Water Vapor Permeability (at 38°C (100°F)/100% RH) | 992 (64) | gm.25μm/m²/day (gm.mil/100 in²/day) | F-1249 |
| Nitrogen Permeability (at 23°C (73°F)/0% RH) | 14.0 (0.9) | cc.25μm/m²/day (cc.mil/100 in²/day) | — |
| Carbon Dioxide Permeability | 72.8 (4.7) | cc.25μm/m²/day (cc.mil/100 in²/day) | — |
