Aegis® H155C1HXI
- Chemical Family
- Polyamides
Aegis® H155C1HXI is high viscosity nylon extrusion grade copolymer for monofilament trimmer line & fishline applications. Aegis® H155C1HXI possesses combination of excellent filament tenacity, flexibility, & transparency properties as well as excellent chemical/wear resistance.
Properties
- Physical Form
- Pellets
- Solid
Product families
- Polyamides
Other characteristics
- Brand
- Aegis®
- Polymer Name
- Polyamide (unspecified)
- Processing Methods
- Extrusion, Film Extrusion
- Markets
- Consumer Goods
- Applications
- Consumer Goods — Lawn & Garden
- Consumer Goods — Sports & Recreation
- Technology
- Plastics
- Material Handling
This product is supplied in sealed containers and drying prior to processing is not required. However, higher moisture is the primary cause of processing problems. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80°C (176°F) is recommended. Drying time is dependent on moisture level. Further information concerning safe handling procedures can be obtained from the Safety Data Sheet. Alternatively, please contact your AdvanSix representative.
- Material Features
- Chemical Resistant
- Excellent Flexibility
- Excellent Transparency Properties
- Good Tenacity
- High Viscosity
- Wear Resistant
- Plastics and Elastomers End Uses
- Fans
- Front Spoiler
- Monofilament Trimmer Lines
- Shrouds
- Side Spoiler
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Film Extrusion
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Moisture (Saturation) | 10 | % | ASTM D-570 |
| Melting Point | 187 (369) | °C (°F) | ASTM D-3418 |
| Specific Gravity (at 23°C (73.4°F)) | 1.12 | — | ASTM D-792 |
| Extractable Content | 6.0 - 8.0 | % | SOP-702-307 |
| Moisture (at 50% RH) | 3.1 | % | ASTM D-570 |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (FAV) | 125 - 145 | — | ASTM D-789 |
| SAV (at 96% Sulfuric Acid) | 3.65 - 3.85 | — | — |
| Bulk Density | 670 | kg/m³ | — |
| Pellet Shape | Cylindrical | — | — |
| Pellet Size | 1.9 - 2.5 | mm | — |
| Moisture Content | max. 0.12 | % | ASTM D-6869 |
