To catalogue

SPARTACOTE® Cove Gel

SPARTACOTE® Cove Gel is an epoxy system designed for installation as an integral cove base. For use with SPARTACOTE resinous coating systems to create seamless transitions between the floor and wall.

Product families

Building & Construction — Flooring & Surfaces
  • Floor Coatings

Other characteristics

Brand
SPARTACOTE
Features
Low Odor, Low VOC
Product Type
Epoxy Coating
Application Method
Brush, Roller, Wipe
Compatible Substrates & Surfaces
Masonry
Note

Working properties based on 70°F & 50% RH. Changes in ambient conditions may cause times to vary

Usage
  • Commercial kitchens
  • Pharmaceutical and Research Facilities
  • Laboratories
  • Water Treatment Plants
  • Educational Facilities
  • Clean Rooms
  • Food and Beverage Facilities
  • Showers and Bathrooms
Markets
Building & Construction
Cautions

Wear protective gloves, protective clothing and eye protection.; Causes skin burns. If skin irritation or rash occurs: get medical advice/attention; Causes serious eye damage. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Call a physician immediately.; If swallowed: Rinse mouth do not induce vomiting. Call a physician immediately.; Keep out of reach of children

PACKAGING
9806-0005-2 Full Kit
5 gal (18.9L) kit
Part A
3.2 gal (12.1L) in a 5 gal (18.9L) pail
Part B
1.8 gal (6.8L) in a 3.5 gal (13.2L) pail
Body Coat requires the use of SPARTACOTE Blended Quartz (sold separately)
Advantages
  • Contributes toward MR 5 and EQ 4.2 under LEED
  • Low VOC's
  • Easy to apply
  • Low installation odor
Maintenance

The long term performance, appearance, and life expectancy of wear surface products are critically dependent upon a good routine maintenance program designed specifically for the installed wear surface. SPARTACOTE™ floor coating systems are nonporous, causing dirt and contaminants to remain on the surface. The use of properly placed walk-off mats, inside and outside, will help increase the life of the floor. Recommend maintenance program consist on frequent and through cleaning utilizing a neutral pH cleaner. Frequency of washing will vary depending on floor usage type, traffic and age.

Technical data

Table 1 of 3

3 rows
CharacteristicValueUnit
Working Time65 - 70minutes
Cure Time (Dry to touch)4 - 6hours
Full Cure7.0days

Table 2 of 3

3 rows
CharacteristicValueUnitMethod
Adhesion7.0daysASTM D7234
Tensile Bond Strength5500 - 5600 (37.9 - 38.6 )psi(MPa)ASTM D638
Compressive strength5500 - 5600 (37.9 - 38.6)psi(MPa)ASTM D695

Table 3 of 3

1 row
CharacteristicValueUnit
VOC/LEED (as intended for use)30.0g/L

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.